Assembly Instructions

Product Information

Thank you for purchasing this quality product. Please check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify, and count all parts and hardware. Compare with the parts list to ensure all parts are present.

Important: DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED.

Important Safety Information:

• Use of a power tool to assemble this product will invalidate any claim and may damage the product, making it unsafe.
• Please assemble on a clean, soft surface to avoid damage.
• Keep children and animals away from the work area; small parts could cause choking if swallowed.
• We recommend assembling with the assistance of another person to make the process easier and prevent injury.
• Please put all parts on a non-abrasive floor before assembly and follow the steps carefully.

Estimated assembly time: 30 minutes.

Model N715P218121 (Table)

Parts List

• A: Table Top 1 (1 PC)
• B: Table Top 2 (1 PC)
• C: Left Leg (2 PCS)
• D: Right Leg (2 PCS)
• E: Support Bar (2 PCS)

Hardware List

• 1. Bolt: M8 x 60 mm (8 PCS)
• 2. Bolt: M8 x 50 mm (12 PCS)
• 3. Bolt: M8 x 40 mm (8 PCS)
• 4. Spring Washer: Ø8 x 13 mm (8 PCS)
• 5. Flat Washer: Ø8 x 18 mm (20 PCS)
• 6. Dowel: Ø10 x 30 mm (2 PCS)
• 7. Allen Wrench: 4 x 60 mm (1 PC)

Assembly Steps

Step 1

Connect Table Top 1 (A) and Table Top 2 (B) using Dowels (6).

Step 2

Attach the support bars (E) to the table tops (A, B) using Bolts (2), Spring Washers (4), Flat Washers (5), and the Allen Wrench (7).

Step 3

Insert Support Bars (E) into the designated slots.

Step 4

Secure the Support Bars (E) using Bolts (2) and the Allen Wrench (7).

Step 5

Attach the legs (C, D) to the table assembly using Bolts (3), Spring Washers (4), and Flat Washers (5), and the Allen Wrench (7).

Step 6

Attach the remaining legs (C, D) to the table assembly using Bolts (1), Spring Washers (4), Flat Washers (5), and the Allen Wrench (7).

Model N715P218122 (Chair)

Parts List

• A: Leaf Hind Leg (2 PCS)
• B: Right Hind Leg (2 PCS)
• C: Backrest Bar 1 (2 PCS)
• D: Backrest Bar 2 (2 PCS)
• E: Armrest (4 PCS)
• F: Front Legs (4 PCS)
• G: Seat Frame (2 PCS)
• H: Seat Cushion (2 PCS)
• I: Back Cushion (2 PCS)

Hardware List

• 1. Bolt: M6 x 90 mm (16 PCS)
• 2. Bolt: M6 x 50 mm (8 PCS)
• 3. Bolt: M6 x 35 mm (12 PCS)
• 4. Spring Washer: Ø6 x 11 mm (8 PCS)
• 5. Flat Washer: Ø6 x 18 mm (8 PCS)
• 6. Metal Plate: 100 x 50 mm (4 PCS)
• 7. Screw: M4 x 20 mm (24 PCS)
• 8. Allen Wrench: 4 x 60 mm (2 PCS)

Assembly Steps

Step 1

Attach the Seat Frame (G) to the side frame components (A, C, D) using Bolts (1) and the Allen Wrench (8).

Step 2

Attach the other side frame components (B, C, D) to the Seat Frame (G) using Bolts (1) and the Allen Wrench (8).

Step 3

Connect the backrest bars (C, B) to the frame using Bolts (3) and the Allen Wrench (8).

Step 4

Attach the front legs (F) to the seat frame (G) using Bolts (2), Spring Washers (4), Flat Washers (5), and the Allen Wrench (8).

Step 5

Attach the armrests (E) to the chair frame using Metal Plates (6), Screws (7), and the Allen Wrench (8).

Step 6

Attach the remaining armrests (E) to the chair frame using Metal Plates (6), Screws (7), and the Allen Wrench (8).

Step 7

Attach the backrest bars (E) to the chair frame using Bolts (3) and the Allen Wrench (8).

Step 8

Place the Seat Cushion (H) and Back Cushion (I) onto the chair frame.

Step 9

The chair assembly is now complete.

Important Note

Please do not return this product to the retailer. If you encounter any trouble with assembly or have missing or damaged parts, please contact the seller for assistance.