Anker SOLIX C300 DC Portable Power Station

What's in the Box

This section details the contents of the package.

• Anker SOLIX C300 DC Portable Power Station
• 140W USB-C to USB-C Charging Cable
• Important Safety Instructions

[Diagram Description: The 'What's in the Box' section visually presents the Anker SOLIX C300 DC Portable Power Station, a 140W USB-C to USB-C Charging Cable, and a booklet labeled 'Important Safety Instructions'.]

Overview

This section provides a detailed overview of the Anker SOLIX C300 DC Portable Power Station, identifying its various components.

[Diagram Description: A detailed illustration shows the front and side views of the Anker SOLIX C300 DC Portable Power Station. Key components are numbered: 1. Retractable Light, 2. LCD Screen, 3. IoT Button, 4. Main Power Button, 5. 12W USB-A Output Port, 6. Solar Input and Car Input Port, 7. 15W USB-C Output Port, 8. 100W USB-C Output Port, 9. Handle, 10. Reset Button, 11. Light Button, 12. Car Socket, 13. Car Socket On/Off Button, 14. 140W USB-C Input/Output Port. A symbol indicates bidirectional interfaces.]

Recharge Your Power Station

This section explains the different methods to recharge the Anker SOLIX C300 DC Portable Power Station.

Solar Panel Recharging (100W Max)

Recharge the power station using a solar panel with a maximum input of 100W. Connect up to one Anker 100W or 60W Solar Panel using a solar charging cable (sold separately).

Important: The solar panel's output voltage must be between 11V-28V to prevent damage to the power station.

[Diagram Description: An illustration shows an Anker solar panel connected via a solar charging cable to the 'Solar In' port of the power station.]

USB-C Recharging (280W Max)

Recharge the power station by connecting it to a wall adapter using a USB-C cable. Up to two 140W USB-C Input/Output ports can be used simultaneously for faster charging. It is recommended to use a 140W USB-C cable and a 140W adapter for optimal charging experience (cables and adapters sold separately).

[Diagram Description: An illustration shows USB-C cables connecting wall adapters to the power station's USB-C input/output ports.]

Car Recharging

Recharge the power station by connecting it to a car's output port using the car charging cable (sold separately).

Note: When the power station's battery level reaches 1%, the 'Remaining Battery' indicator will flicker as a reminder to recharge.

[Diagram Description: An illustration shows a car charging cable connecting a car's 12V output port to the power station's car socket.]

Powering Your Device

This section guides users on how to power devices using the Anker SOLIX C300 DC Portable Power Station.

Power On/Off

Press and hold the main power button for 3 seconds to turn the power station on or off. The 'Remaining Battery' indicator on the LCD screen signifies that the power station is ready to charge devices.

• Pressing the main power button while powered on will turn the screen on or off.
• The screen automatically turns off after 30 seconds of inactivity. This auto-off time can be adjusted in the Anker app.
• The power station will automatically shut down if no output ports are active and no power loads are detected for 2 hours. This standby duration can also be set in the Anker app. It is recommended not to disable this feature to conserve power during long periods of disuse.

USB Charging

Connect your devices to the available USB ports for charging.

Note: The USB-C2 and USB-C3 output ports are classified as PS3. Connecting additional equipment to these ports carries a risk of fire; ensure connected equipment or accessories have appropriate fire safeguards. Only connect to equipment or accessories compliant with IEC/EN IEC/BS EN IEC 62368-1 standards (clauses 6.3, 6.4, and 6.5). Use a USB-C 5A cable to achieve maximum power delivery (up to 100W or 140W).

Car Socket Charging

Turn on the car socket and connect your devices to begin charging.

[Diagram Description: An illustration shows a device connected to the power station's car socket, which is powered on.]

Light

The power station features a retractable light. Pull it up to extend it. Press the light button to cycle through different brightness levels (indicated by ☀️, ☀️☀️, ☀️☀️☀️).

[Diagram Description: An illustration shows a hand pulling up the retractable light on top of the power station. Another illustration shows the LCD screen displaying brightness indicators (x1, x2, x3) and a finger pressing the light button.]

LCD Screen Guide

This section explains the various indicators and information displayed on the power station's LCD screen.

[Diagram Description: An illustration of the LCD screen with numbered indicators. The indicators are explained below.]

• 1. IoT Indicator: Press the IoT button once to enable Bluetooth and Wi-Fi for app connection. Press and hold for 2 seconds to disable them. Press and hold for 7 seconds to reset Bluetooth and Wi-Fi.
• 2. Low-Temperature Alert: This icon appears when the power station is too cold to operate safely. Stop use until the icon disappears.
• 3. Overload Warning: This icon indicates a port is overloaded. The overloaded port will shut off automatically to prevent damage. Remove the device causing the overload.
• 4. High-Temperature Alert: This icon appears when the power station is too hot. Stop use and allow it to cool down until the icon disappears.
• 5. USB-C Input/Output Port Indicator
• 6. USB-A Output Port Indicator
• 7. Car Charging Indicator
• 8. Remaining Battery: Displays the current battery percentage.
• 9. Current Output Power: Shows the total power being outputted by the device.
• 10. Current Input Power: Shows the total power being received by the device.
• 11. Estimated Time to Fully Recharge: An estimate of how long it will take to fully charge the power station.
• 12. Estimated Time for Battery to Deplete: An estimate of how long the remaining battery will last based on current usage.

The Anker App for Smart Control

Remotely control your power station using the Anker app.

1. Download the Anker app from the App Store (iOS) or Google Play (Android).
2. Connect the power station to a network for initial setup. Once connected, you can use it off-grid.
3. Firmware Update: You will be notified of new firmware versions when the power station is connected to the app. Ensure the power station is AC charged and connected to Wi-Fi or Bluetooth during the update process.

Install Firmware Update: A notification will be sent before updates are installed. The power station must be charging and connected to Wi-Fi to complete the update.

FAQ

Q1: Can Anker SOLIX C300 DC Portable Power Station power a CPAP machine?

Yes.

Q2: What should I do when using a solar charger to charge Anker SOLIX C300 DC Portable Power Station?

The solar input supports an 11-28V solar charger with an XT-60 connector. Anker recommends using an Anker 100W / 60W Solar Panel for the best compatibility.

Q3: Can the USB-C ports be used to charge Anker SOLIX C300 DC Portable Power Station (input only), or are they output only?

The USB-C1 and USB-C4 ports are output only. The USB-C2 and USB-C3 ports support both output and input.

Q4: How do I reset Anker SOLIX C300 DC Portable Power Station?

If the power station is not functioning correctly, insert a paper clip or pin into the reset hole for 1 second to perform a factory reset. If the issue persists, contact support@anker.com.

[Diagram Description: An illustration shows a hand inserting a paper clip into the reset hole on the power station.]

Q5: Why is the power station not working after it hasn't been used for a long time?

Storing the power station at a low capacity for extended periods can lead to self-discharge of lithium batteries, resulting in quick discharge, poor conductivity, and reduced battery lifespan, potentially causing it to stop working.

Q6: How should I store and maintain the power station?

When storing the power station:

• Turn off the main power button.
• Store it in a dry and cool environment.
• Check the remaining battery capacity weekly. If the battery level drops below 30%, fully charge it. Recharge to 100% every 3 months regardless of the level.

Q7: Does the power station have to be used upright?

Yes, the product must be used and stored in an upright position.

Q8: Does the Anker SOLIX C300 DC Portable Power Station need to be recharged before first use?

Yes, before first use, recharge the unit to activate it.
Activation methods:

1. PD charging activation: Requires a 9V or above charger.
2. MPPT charging activation: Solar panel output voltage range 11~28V.

Specifications

USB Power Distribution Table

This table outlines the power distribution when using multiple ports simultaneously. Note that USB-A1, USB-A2, and USB-C4 are grouped as one interface (USB-A1&A2&C4) for a total output of 20W. The product's total output is capped at 300W.