Waterdrop
Reverse Osmosis Water Filtration System
Model: WD-G3P600
Certifications and Standards
The system is certified by IAPMO R&T against NSF/ANSI Standard 58 for the contaminants listed in the performance data sheet, and to NSF/ANSI 372 (≤0.25%).
[IAPMO R&T Certification Mark with Platinum Seal]
Performance Data Sheet
Testing performed under NSF/ANSI standards 53 & 58. This system has been tested according to NSF/ANSI 53 & 58 for the reduction of substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for the water leaving the filter as specified in NSF/ANSI 53&58.
| Substance | NSF Specified Challenge Concentration (mg/L) | Max Permissible Product Water Concentration (mg/L) | NSF Reduction Requirements |
|---|---|---|---|
| TDS | 750 ±40 | / | ≥75% |
| Contaminant Reduction Performance | Contaminant Reduction Performance | ||||||
|---|---|---|---|---|---|---|---|
| Substance | NSF Specified Challenge Concentration (mg/L) | % Reduction | Product Water Concentration (mg/L) | Substance | NSF Specified Challenge Concentration (mg/L) | % Reduction | Product Water Concentration (mg/L) |
| Chloroform | 0.300 ± 10% | 98.2% | / | Dibromoacetonitrile | 0.024 | 98% | 0.0006 |
| Alachlor | 0.05 | > 98% | 0.001 | Dichloroacetonitrile | 0.0096 | 98% | 0.0002 |
| Atrazine | 0.1 | > 97% | 0.003 | Trichloroacetonitrile | 0.015 | 98% | 0.0003 |
| Benzene | 0.081 | > 99% | 0.001 | 1,1-dichloro-2-propanone | 0.0072 | 99% | 0.0001 |
| Carbofuran | 0.19 | > 99% | 0.001 | 1,1,1-trichloro-2-propanone | 0.0082 | 96% | 0.0003 |
| Carbon Tetrachloride | 0.078 | > 98% | 0.0018 | Heptachlor (H-34, Heptox) | 0.025 | > 99% | 0.00001 |
| Chlorobenzene | 0.077 | > 99% | 0.001 | Heptachlor Epoxide | 0.0107 | 98% | 0.0002 |
| Chloropicrin | 0.015 | > 99% | 0.0002 | Hexachlorobutadiene | 0.044 | > 98% | 0.001 |
| 2,4-D | 0.11 | > 98% | 0.0017 | Hexachlorocyclopentadiene | 0.06 | > 99% | 0.000002 |
| Dibromochloropropane (DBCP) | 0.052 | > 99% | 0.00002 | Lindane | 0.055 | > 99% | 0.00001 |
| O-Dichlorobenzene | 0.08 | > 99% | 0.001 | Methoxychlor | 0.05 | > 99% | 0.0001 |
| P-Dichlorobenzene | 0.04 | > 98% | 0.001 | Pentachlorophenol | 0.096 | > 99% | 0.001 |
| 1,2-Dichloroethane | 0.088 | > 95% | 0.0048 | Simazine | 0.12 | > 97% | 0.004 |
| 1,1-Dichloroethylene | 0.083 | > 99% | 0.001 | Styrene | 0.15 | > 99% | 0.0005 |
| cis-1,2-Dichloroethylene | 0.17 | > 99% | 0.0005 | 1,1,2,2-tetrachloroethane | 0.081 | > 99% | 0.001 |
| Trans-1,2-Dichloroethylene | 0.086 | > 99% | 0.001 | Tetrachloroethylene | 0.081 | > 99% | 0.001 |
| 1,2-Dichloropropane | 0.08 | > 99% | 0.001 | Toluene | 0.078 | > 99% | 0.001 |
| cis-1,3-Dichloropropylene | 0.079 | > 99% | 0.001 | 2,4,5-TP (silvex) | 0.27 | 99% | 0.0016 |
| Dinoseb | 0.17 | 99% | 0.0002 | Tribromoacetic Acid | 0.042 | > 98% | 0.001 |
| Endrin | 0.053 | 99% | 0.00059 | 1,2,4-Trichlorobenzene | 0.16 | > 99% | 0.0005 |
| Ethylbenzene | 0.088 | >99% | 0.001 | 1,1,1-Trichloroethane | 0.084 | 95% | 0.0046 |
| Ethylene Dibromide (EDB) | 0.044 | >99% | 0.00002 | 1,1,2-trichloroethane | 0.15 | > 99% | 0.0005 |
| Bromochloroacetonitrile | 0.022 | 98% | 0.0005 | Trichloroethylene | 0.18 | > 99% | 0.001 |
| Xylenes (total) | 0.07 | >99% | 0.001 | Trihalomethanes (includes): chloroform (surrogate chemical), bromoform, bromodichloromethane, chlorodibromomethane | 0.3 | > 95% | 0.015 |
