Orbit 12-Station Sprinkler Controller Quick Start Guide

This guide provides basic installation, programming, and Iris® connection help for your new Orbit® Controller. For more information about Iris®, please visit www.lowes.com/iris. For additional manual programming instructions, please download the full manual “Outdoor Swing Panel Controller” at www.orbitonline.com.

Getting Started

Required Tools: Phillips Screwdriver, Wire Strippers

Select Location: Choose a clean, dry location out of direct sunlight, with at least 9 inches of clearance for the swing door. Indoor mounting is recommended.
Mount Controller: Use the included mounting template to mark screw locations. Hang the controller on a screw using the keyhole. Ensure it is level. Screw through one of the pre-formed mounting holes for added stability.
Connect Sprinkler Valves to Controller Wires: Connect one wire from each valve to the common wire (usually white) leading to the controller. Connect the other wire from each valve to one of the colored wires leading to the controller. Only connect one valve to each terminal (station).
Connect Valve Wire to Terminal: Push the tab upward to release the wire. Strip the wire and push it into the terminal.
Activate Battery: Remove the plastic strip to activate the backup battery (CR2032 Lithium). This battery maintains your program in case of AC power loss. It should be replaced annually.
Connect Controller to Power Source: Connect the controller's transformer to an AC power line voltage source. A battery alone will not operate the valves.
Connect Controller to Iris® Home Management System: Log into your Iris® account at www.lowes.com/iris using a computer. Follow the instructions in the "Add Device" section of the Iris® website. The controller will attempt to connect to Iris® automatically when first powered on. The wireless icon will flash until paired, then remain solid with 'SMART MODE' displayed.

Button Functions

ENTER: Confirms a new setting.
MANUAL: Waters manually.
CLEAR: Clears a setting.
PROGRAM: Switches between programs A, B, and C.
ARROW []: Skips to the next setting/station or moves to other programs/settings.
ARROW []: Goes back to the previous setting/station or moves to other programs/settings.
RAIN DELAY: Pauses operation for 24-72 hours due to rain.
[+]: Increases a numeric setting.
[-]: Decreases a numeric setting.
SYNC: Holding for 5 seconds cancels pairing. Pressing 5 times rapidly un-pairs from Iris®.
RESET: Resets hardware and clears device settings (does not delete Iris® settings).

Dial Position Functions

AUTO: Watering mode.
SET CLOCK: Sets calendar and clock time.
SET DATE: Sets Year, Month, and Day.
START TIME: Sets the time to begin watering.
RUN TIME: Sets watering duration for each station.
HOW OFTEN: Sets watering frequency (days or interval).
BUDGET: Adjusts overall watering as a percentage.
OFF: Turns all stations off.

Manual Controller Operation Without Iris®

Turn dial to SET CLOCK and enter current time using [+/-] buttons. Press [ENTER].
Turn dial to SET DATE and enter Year, Month, and Day using [+/-] buttons. Press [ENTER] to advance.
Turn dial to START TIME and enter one start time using [+/-] buttons. Press [ENTER] to save. (Additional start times can be entered for multiple watering periods per day; refer to the full manual for instructions).
Turn dial to RUN TIME and enter the watering duration for each station using [+/-] buttons. Press [ENTER] or [ARROW] to move between stations.
Turn dial to HOW OFTEN to select watering days or intervals using [ARROWS] and [ENTER]. (Refer to the full manual for Odd/Even day or Interval instructions).
Turn dial to AUTO to complete programming.

Additional Features

Rain Delay

Turn dial to AUTO and press [RAIN DELAY]. Use [+/-] to select 24, 48, or 72 hours. Press [ENTER] to begin. Press [CLEAR] to cancel.

Manual Watering

To run all stations: Turn dial to AUTO, press [MANUAL]. Display shows A, B, ALL. Press [ENTER] to begin. All stations water consecutively for their programmed duration.

To run a specific station: Turn dial to AUTO, press [MANUAL]. Use [/] to select the station. Use [+/-] to set the desired duration. Press [ENTER] to begin. Press [CLEAR] to stop manual watering.

Note: If no selection is made within 5 seconds after pressing [MANUAL], watering will proceed with programmed RUN TIMES. If no RUN TIMES are set, nothing will happen.

Important Notes About Using Controller with Iris®

When paired with Iris®, programming and operation must be done via the Iris® website or mobile app. The controller device itself will not be programmable.
The controller operates in 'smart mode' in all dial positions except OFF.
To program or operate the controller at the device, you must un-pair it from Iris®.

Testing Communication with Iris®

Select the device on the Iris® website and click "Test". The wireless icon on the controller screen will flash until test mode ends.

Remove Controller from Iris®

Log into your Iris® account at www.lowes.com/iris and select the controller, then click "Remove". Alternatively, press the SYNC button 5 times rapidly on the back of the swing panel.

Note: If you do not pair or un-pair the controller, you can still operate it manually. However, without Iris®, you will not be able to control or monitor it from a smart device or access additional Iris® features.

Help and Support

Iris® Customer Service: 1.855.469.IRIS, www.lowes.com/iris
Orbit Product/Warranty Support: 1-800-488-6156, www.orbitonline.com
Technical Service: 1-800-488-6156, 1-801-299-5555

Listings and Compliance

Tested to UL60730 standard & ETL® listed.
International models: CSA® and CE® approved.
Complies with Canadian ICES-003 Class B digital apparatus.
Input: 120V, 60Hz, 0.2A
Output: 26V, 500mA
Rated impulse voltage: 2500V
Pollution degree: 2
Supply cord replacement must be by manufacturer or accredited agent.
FCC Statement: Complies with Part 15 of FCC rules. Operation subject to two conditions: no harmful interference, and must accept received interference. Changes not approved by Orbit may void FCC authorization. This equipment complies with limits for Class B digital devices, designed for reasonable protection against harmful interference in residential installations.

Warranty

Orbit® Irrigation Products, Inc. warrants products to be free from defects in materials and workmanship for six years from the date of purchase. Orbit will replace defective parts free of charge under normal use and service within six years (proof of purchase required). Orbit reserves the right to inspect defective parts. Orbit Irrigation Products, Inc. is not responsible for consequential or incidental costs or damages. Warranty liability is limited to replacement or repair of defective parts. To exercise warranty, return the unit to your dealer with a copy of the sales receipt.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Caution: This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure they do not play with the appliance.

Contact Information

Orbit® Irrigation Products, Inc.
North Salt Lake, UT 84054
1.801.299.5555
orbitonline.com

	Orbit B-hyve Smart WiFi Indoor Sprinkler Timer Quick Start Guide Get started quickly with the Orbit B-hyve Smart WiFi Indoor Sprinkler Timer. This guide provides instructions on installation, Wi-Fi connection, app setup, and basic operation for your smart irrigation system.
	B-HYVE XR Smart Indoor/Outdoor Sprinkler Timer User Guide Comprehensive guide to installing, connecting, and operating the Orbit B-HYVE XR Smart Indoor/Outdoor Sprinkler Timer. Learn about Wi-Fi setup, manual controls, app integration, and specifications.
	Orbit Smart Hose Faucet Timer Setup and Operation Guide Comprehensive guide for the Orbit Smart Hose Faucet Timer, covering setup, Iris integration, manual operation, battery installation, and testing communication. Features include scheduling, remote control via Iris, and freeze protection.
	Orbit B-hyve Smart Wi-Fi Indoor Sprinkler Controller Quick Start Guide Quick start guide for the Orbit B-hyve Smart Wi-Fi Indoor Sprinkler Controller, covering setup, installation, Wi-Fi connection, programming, and specifications. Compatible with other B-hyve products.
	H2O-Six® Gear Drive Sprinkler The Orbit H2O-Six® Gear Drive Sprinkler is designed for efficient outdoor irrigation. It features adjustable spray distance, customizable rotation stops for circle adjustment, and a selectable spray pattern. The robust spike base ensures stable positioning. For use with cold water only; avoid spraying near electrical connections.
	Orbit B-hyve WiFi Sprinkler Timer User Manual Comprehensive user manual for the Orbit B-hyve WiFi Sprinkler Timer, covering installation, app setup, programming, manual operation, and troubleshooting. Learn how to conserve water and manage your irrigation efficiently.
	Orbit HRC 400 Smart Wi-Fi Sprinkler Controller User Guide A comprehensive user guide for the Orbit HRC 400 Smart Wi-Fi Sprinkler Controller, covering installation, setup, programming, and troubleshooting.
	Orbit Voyager II Gear Drive Sprinkler Installation and Adjustment Guide Comprehensive guide for installing, adjusting spray distance, and maintaining the Orbit Voyager II gear drive sprinkler. Includes step-by-step instructions and safety precautions for outdoor use.