ROCCAT Burst Pro

Technical Facts

Tech Specs Burst Pro

• ROCCAT® Owl-Eye 16K optical sensor
• PixArt PMW3381 (Based on PMW3389)
• ROCCAT® Titan Switch Optical
• 100 million click lifecycle
• Adjustable lift-off distance
• 50g acceleration
• On-board memory
• 1.8m flexible cable
• 66g weight
• 1000Hz polling rate
• ARM Cortex-M0 48MHz
• Default DPI Steps: 400, 800 (Default), 1200, 1600, 3200
• DPI adjustable in steps of 50
• 450 IPS tracking speed
• Angle snapping: on/off

System Requirements

• Windows® 7, 8 and 10 (software support)
• USB 2.0 (or higher)
• Internet connection (for driver software)

Should you need assistance, our support team is ready to help you with any technical questions. Just send an e-mail to support@roccat.com or visit our website at: WWW.ROCCAT.COM/SUPPORT

Installation

1. Plug the USB connector on your ROCCAT® Burst into any free USB port.
2. Boot your computer and connect to the Internet.
3. Navigate to www.roccat.com/roccat-swarm and download the latest version of Swarm.
4. Start the software installation process and follow the on-screen instructions.

Disposal Information

The [crossed-out bin symbol] means that this product must not be disposed of with unsorted household waste. As electrical devices can contain harmful substances which may cause environmental damage or harm to your health if not disposed of correctly, please dispose of these products separately. As the end user, you are required by law to dispose of used electrical equipment at an official recycling point. For information about local recycling points, contact your local authority, civic amenity site or the business where you purchased this product. By disposing of electrical products at an official recycling point, you are doing your bit to ensure equipment is recycled correctly and professionally, and our environment is protected.

When purchasing a new product, the retailer will let you hand in old products and dispose of them free of charge provided the product you are handing in is of a similar type and has the same functions as the product you are purchasing. You can hand in small used electrical and electronic equipment (measuring no longer than 25 cm on any one side) for free and with no obligation to purchase a similar product at electrical and electronic retail outlets with sales areas larger than 400m² or at nearby recycling points designated by the retail outlet.

Wherever possible, remove any batteries before disposing of the device. Under law, as a user you face the risk of penalties if you dispose of devices and batteries illegally.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

General Safety Guidelines and Intended Use

1. Do not open or modify the product.
2. Unauthorized changes or modifications may void the operation authority and/or warranty.
3. In case of trouble or doubt, contact us immediately.
4. Keep the product away from fire/water/humidity/temperature extremes.
5. Only use as intended with a compliant PC and connector part.
6. Improper or incorrect use of the product or use of the product for purposes not recommended by the manufacturer void the liability and/or warranty.
7. Don't look into the light beam on bottom of the mouse.

Declaration of Conformity

Hereby, Voyetra Turtle Beach, Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. The full Declaration of Conformity can be requested via following:

Company: Voyetra Turtle Beach, Inc.
Address: 44 South Broadway, 4th Floor, White Plains NY 10601, USA
E-Mail: support@roccat.com

Company Information & Copyright

VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY 10601, USA

© 2022 Voyetra Turtle Beach, Inc. All rights reserved. Any product names mentioned in this manual may be trademarks or registered trademarks and are the property of their respective owners. Information contained herein is subject to change without notice. Voyetra Turtle Beach, Inc. shall not be made liable for any errors that may appear in this manual. This publication or parts of it may not be reproduced without the express consent of the publisher. ROCCAT® is a Turtle Beach Brand.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Certifications and Compliance

BSMI information: https://www.roccat-neon.com/Bsmi

Harmful Substances Declaration Format:

This table is prepared in accordance with the provisions of SJ/T11364. 0: Indicates that the content of the hazardous substance in all homogeneous materials of this part is below the limit requirements specified in GB/T26572. X: Indicates that the hazardous substance content in at least one homogeneous material of this part exceeds the limit requirements specified in GB/T26572.

Certifications: FC, CE, T3D362, RoHS, G, R-R-VTB-BSP, 10, ID003, VCI

Join the Community

Become a ROCCAT member and register your product at: www.roccat.com/support/register-your-product

• Service & Support: Easy access to customer support
• Authenticity Check: Make sure you own an original
• Exclusive Deals: Opt-in for special offers and downloads

Please use your product's serial number (located on the bottom label).