ROCCAT Burst Pro Quick Installation Guide

Technical Specifications

• ROCCAT Owl-Eye 16K optical sensor (PixArt PMW3381, based on PMW3389)
• ROCCAT Titan Switch Optical with 100 million click lifecycle
• Adjustable lift-off distance
• 50g acceleration
• On-board memory
• 1.8m flexible cable
• 66g weight
• 1000Hz polling rate
• ARM Cortex-M0 48MHz processor
• Default DPI Steps: 400, 800 (Default), 1200, 1600, 3200 (adjustable in steps of 50)
• 450 IPS tracking speed
• Angle snapping: on/off

System Requirements

• Windows 7, 8, and 10 (for software support)
• USB 2.0 (or higher)
• Internet connection (for driver software)

Default Button Assignment (No Driver Installed)

The ROCCAT Burst Pro features a standard gaming mouse layout. The default assignments are:

1. Left mouse button
2. Right mouse button
3. Universal scroll wheel
4. Scroll up
5. Scroll down
6. Browser Forward
7. Browser Backward
8. DPI Cycle

The Chinese text on page 2 provides the same button assignments.

Installation

Follow these steps to install your ROCCAT Burst Pro:

1. Plug the USB connector of your ROCCAT Burst Pro into any free USB port on your computer.
2. Boot your computer and connect to the Internet.
3. Navigate to www.roccat.org/roccat-swarm and download the latest version of the Swarm software.
4. Start the software installation process and follow the on-screen instructions.

Safety and Disposal Information

General Safety Guidelines:

• Do not open or modify the product. Unauthorized changes may void the warranty.
• Keep the product away from fire, water, humidity, and extreme temperatures.
• Use the product only as intended with a compliant PC and connector.
• Improper use may void liability and warranty.
• Avoid looking directly into the light beam on the bottom of the mouse.

Disposal Information:

The symbol of a crossed-out wheelie bin [symbol of a crossed-out bin] indicates that this product must not be disposed of with unsorted household waste. Electrical devices may contain harmful substances that can damage the environment or health if not disposed of correctly. Therefore, these products must be disposed of separately.

As an end user, you are legally required to return used electrical equipment to an official collection point. Information on collection points near you can be obtained from local authorities, waste disposal companies, or the store where you purchased the product. By disposing of products at an official collection point, you contribute to proper recycling and environmental protection.

When purchasing a new product, retailers may offer to take back old products for free disposal, provided the returned product is of a similar type and has the same functions as the new product.

Small electrical and electronic equipment (with no external dimensions exceeding 25 cm) can be handed in for free and without obligation to purchase a similar product at retail outlets with a sales area of at least 400 square meters dedicated to electrical and electronic equipment, or at official collection points designated by the retailer in the immediate vicinity.

Batteries and accumulators should be removed from the device before disposal, if possible. Unauthorized disposal of devices, batteries, and accumulators by the user may lead to penalties according to applicable legislation.

Compliance and Registration

FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

EU Declaration of Conformity: Voyetra Turtle Beach Corp. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. The full Declaration of Conformity can be requested via email to support@roccat.org.

Australian Consumer Law: Goods come with guarantees that cannot be excluded. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

BSMI Statement: For BSMI limited substance statement table inquiry, please visit http://bsmi.roccat.org/218/. The table indicates the presence of hazardous substances in product components.

Join the Community: Become a ROCCAT member and register your product at www.roccat.org/support/register-your-product for easy access to customer support, authenticity checks, and exclusive deals.

Please use your product's serial number (located on the bottom label) for registration.