Alpha Fan Instruction Manual
DRUM FAN
Model: MDF/8
TECHNICAL SPECIFICATIONS
| Model | No. of blades | Blade Size | Voltage | Wattage |
|---|---|---|---|---|
| MDF/8 | 4 | 8" | 240V~50Hz | Max. 20W |
CUSTOMER SERVICE CENTRE
If you need any technical assistance or faulty report, please contact our customer service centre at:
Malaysia
Alpha Home Appliances Sdn. Bhd. (390258-H)
Head Office: 6, Jalan Sungai Kayu 32/37, Berjaya Park, Sect 32, 40460 Shah Alam, Selangor.
Tel: 03-5740 6666
Website: www.alphamalaysia.com
Email: info@alphamalaysia.com
Johor Bahru: 71, Jalan Molek 3/10, Taman Molek, 81100 Johor Bahru.
Tel: 07-353 4833/4933
Fax: 07-355 4233
Melaka: G-8, Jalan PM3, Plaza Mahkota, 75000 Melaka.
Tel: 06-292 2398/2399
Fax: 06-292 2392
Ipoh: 16, Jalan Tasek Timur, Taman Tasek Indra, 31400 Ipoh, Perak.
Tel: 05-545 2282/5472282
Fax: 05-547 6282
Penang: 2744, Ground Floor, Jalan Chain Ferry, Taman Inderawasih, 13600 Prai.
Tel: 04-397 9923/9920
Fax: 04-397 9690
Pahang: A131, Jalan Dato Wong Ah Jang, Taman Liza, 25100 Kuantan, Pahang.
Tel: 09-516 5226
Fax: 09-513 9226
Singapore
Alpha Sales & Services Pte. Ltd. (200709461 R)
8, Ubi Road 2, #01-07 & 01-08, Singapore 408538.
Tel: +65 6841 0111
Website: www.alphasingapore.com
Email: customercare@alphasingapore.com
SAFETY PRECAUTION
IMPORTANT: PLEASE READ BEFORE USING THE APPLIANCE
- Unplug the power cord during installation, cleaning or relocation of fan.
- Do not modify the length of the power cord.
- Do not use the fan if the power cord or the plug is damaged, or the power socket is loose.
- Repairing/servicing of the fan must be carried out by authorized and qualified electricians only.
- At the event when the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person to avoid a hazard.
- Do not touch the fan and plug when your hands are wet.
- Do not expose the fan to dripping or splashing water or objects filled with water, such as vase.
- Do not use the fan near the gas stove, any fire source, unusually humid or high temperature, oil soot with a lots of metal powder, objects that may be drawn to fan, such as drapes or curtain and outdoor.
- Do not insert hands or fingers into the front grille, or the movable parts.
- Do not use the fan with any solid-state speed control device to reduce the risk of fire or electric shock.
- Place the fan on a stable and level surface.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
WARNING
This appliance is designed to use only those parts supplied with this appliance and/or accessories designated specifically for use with this appliance. Using parts and/or accessories not designated for use with this appliance could result in personal injury or property damage.
DESCRIPTION OF PARTS
The illustrations and information in this manual are for explanation purposes only and may differ from the actual unit. It is subjected to change without prior notice for further improvements.
The fan consists of the following main parts:
- Front Guard: The protective outer grille.
- Circular Loop: A ring that holds the front guard in place.
- Fan Housing: The main body of the fan that encloses the motor and blades.
- Securing Screw: Used to attach or detach parts, particularly for the front guard.
- Fan Blades: The rotating components that move air.
- Base: The stable bottom part of the fan that supports it.
- Power Cord: The cable used to connect the fan to the electrical power supply.
- Plug: The connector at the end of the power cord.
- Handle: Located on the top for carrying the fan.
- Rotary Switch: The control knob for adjusting fan speed.
OPERATION
Speed Control
Turn the rotary slider switch to select fan speed:
- 0: Off
- 1: Low speed
- 2: High speed
The rotary switch is typically located on the fan housing.
Tilting
To adjust the fan's angle:
- Loosen the securing screw located near the base of the fan housing.
- Adjust the fan head to the desired position/angle.
- Tighten the securing screw to fix the position.
MAINTENANCE
IMPORTANT: UNPLUG THE FAN FROM THE SUPPLY SOCKET.
Cleaning
- Do not wet or immerse the motor, switch, power cord, and plug in water.
- Use only lukewarm water and mild detergent to clean the fan. Do not use corrosive or acidic solutions.
- Use a soft or lint-free cloth to clean the fan. Rough fabric will scratch the surface.
- To clean the fan blades, remove the front guard by loosening the 4 screws on the sides of the front guard. (Refer to diagram for screw locations).
Note: Reassemble all parts before use.
