Assembly Steps
Step 1
Illustration shows two separate nutcracker components. The top component has two vertical rods extending downwards. The middle component has corresponding slots. Arrows indicate that the top component is to be attached to the middle component by inserting the rods into the slots.
Step 2
Illustration shows the middle nutcracker component being attached to the bottom nutcracker component in a similar fashion to Step 1. Vertical rods from the middle component insert into slots on the bottom component. Dotted lines with arrows point to locations on the sides of the middle and bottom sections where hardware (D) will be used.
Step 3
Illustration shows the fully assembled nutcracker, which is a stack of several nutcracker figures. The final configuration is presented.
Hardware List
| CODE | PARTS | QTY. |
|---|---|---|
| A | Nutcracker figure holding a wreath | 1PC |
| B | Nutcracker figure holding a Christmas tree | 1PC |
| C | Nutcracker figure holding a candy cane | 1PC |
| D | [Screw/Wingnut] | 4PCS |
