Product Overview
This document provides assembly instructions for the Glitzhome 8.5ft Sun and Moon Rain Chain.
A visual representation shows the complete assembled rain chain featuring a series of decorative sun and moon elements linked together, designed to hang from a gutter.
General Assembly Notes
Please carefully unpack and identify each component before beginning assembly.
Before you begin, please refer to the parts list to ensure you have all necessary parts.
Take care when assembling the unit and always place the parts on a clean, soft surface to prevent scratching.
If you require assistance with assembly or parts, please call 888-357-7263.
Get social with Glitzhome to discover more about their products, tips, and exclusive discounts!
Pre-Assembly Preparation
- Please read through this instruction before beginning assembly.
- Installation may require some slight bending of the gutter clip, which can be easily done by hand or with pliers.
- Please check for any loose links or chains and tighten them before use.
Parts List
8.5ft Rain Chain (A)
A visual representation shows the rain chain component, consisting of multiple decorative cups or elements linked together in a chain.
Gutter Clip (B)
A visual representation shows a V-shaped metal clip designed to hook onto the edge of a gutter.
Quantity for each part: 1
Assembly Instruction
It's best to choose a location where rain chains can lead to landscaped areas, rain barrels, and where overflow can be diverted from foundations.
Step 1: Prepare the Gutter Clip
Unhook the V-shaped Gutter Clip (B) from the Rain Chain (A).
A diagram shows the V-shaped gutter clip (B) being detached from the top link of the rain chain (A).
Step 2: Install the Gutter Clip
Slide the Gutter Clip (B) into the rain gutter drain hole.
A diagram illustrates the V-shaped gutter clip (B) being inserted into the opening of a rain gutter.
Step 3: Attach the Rain Chain
Hook the Rain Chain (A) onto the Gutter Clip (B). Wait for rain and enjoy!
A diagram shows the top link of the rain chain (A) being hooked onto the installed gutter clip (B), with the rest of the chain hanging down.
Note: Use a filter screen to prevent leaves and debris from dropping into your rain chain if needed.
