Kawasaki Ninja 1000SX Slip-On Exhaust System
Performance Comparison
A performance graph compares the stock exhaust system with a slip-on exhaust system for the Kawasaki Ninja 1000SX. The graph plots Wheel Horsepower (WHPwr) and Engine Torque (EngTrq) against Engine Speed (RPM). The slip-on system generally shows higher power and torque output across the RPM range compared to the stock exhaust.
Data was recorded on 03/25/20 using SuperFlow WinDyn™ V software.
Components and Parts List
An exploded view illustrates the components of the Akrapovič slip-on exhaust system for the Kawasaki Ninja 1000SX. The main component is the muffler (3), featuring an end cap (4) and connected via a mid-pipe to the motorcycle's header. The system includes heat shields (2, 18), various clamps (16, 17, 21), bolts (10, 23), washers (11, 12, 22), and rivets (5, 8). Repair kits for the muffler, such as repack kits (24) and sleeve kits (25), are also indicated.
| No. | SalesCode | Description | Qty. |
|---|---|---|---|
| 1 | S-K10SO32-HRC | slip on system | 1 |
| 2 | P-HSK10SO4 | heat shield CA | 1 |
| 3 | M-HR07202C/1 | muffler | 1 |
| 4 | V-EC359 | end cap | 1 |
| 5 | P-BR6 | rivet | 10 |
| 6 | P-TT52 | belt TI for SS sleeve | 2 |
| 7 | P-HST2AL | sticker | 1 |
| 8 | P-BR4 | rivet | 2 |
| 9 | P-MCTR32 | muffler clamp CA | 1 |
| 10 | P-FB174 | bolt | 1 |
| 11 | P-DR41 | washer SS | 1 |
| 12 | P-DR64 | washer SS | 1 |
| 13 | P-FN15 | nut | 1 |
| 14 | P-S2/1 | spring | 1 |
| 15 | P-G66 | graphite gasket | 1 |
| 16 | P-R42 | clamp SS | 1 |
| 17 | P-R115 | clamp SS | 1 |
| 18 | P-HSK10SO4/1 | heat shield CA | 1 |
| 19 | P-X250 | bracket SS | 1 |
| 20 | P-X251 | bracket SS | 1 |
| 21 | P-R49 | clamp SS | 2 |
| 22 | P-DR154 | washer | 4 |
| 23 | P-FB105 | bolt | 2 |
| 24 | P-RPCK249 | muffler repack kit | 1 |
| 25 | P-RKS662R350 | muffler sleeve kit | 1 |
