User Guide for OOB models including: S1 Video Door Phone, S1, Video Door Phone, Door Phone, Phone
IR LED The ambient light is not enough, this can increase picture brightness Light sensor Used to collect environmental light status, when ambient light drops down to 2 Lux, the IR LED will turn on automatically. MIC Audio Capture Button Doorbell button Lens Video image capture Indicator Light Blinking blue light: Configuration status; Red light ON: Failed to connect to WiFi;
File Info : application/pdf, 7 Pages, 1.22MB
DocumentDocumentVIDEO DOOR PHONE OOBVDPS1 SERIES - 1 VIDEO DOOR PHONE Quick Start Guideline Please read it carefully before using the product, and keep this handy www.oobsmarthome.com Packing List After opening the package, please make sure the doorbell (hereinafter referred to as the Equipment") is in good condition. Make sure parts below is included. Main Unit (Including Mounting Bracket) Chime Appearance Introduction MIC IR LED Light Sensor Button Lens www.oobsmarthome.com IR LED The ambient light is not enough, this can increase picture brightness Light sensor Used to collect environmental light status, when ambient light drops down to 2 Lux, the IR LED will turn on automatically. MIC Audio Capture Button Lens Doorbell button Video image capture Indicator Light Blinking blue light: Configuration status; Red light ON: Failed to connect to WiFi; Blue light ON: Connect to phone successfully; Red and blue flash: Connect to WiFi successfully Mounting Panel Press 5 Second for Reset Doorbell Charging port Security screw hole www.oobsmarthome.com Button To reset the device, long press this button for 5 seconds Battery Build in li-ion battery USB Interface Micro-USB-port-charging Mounting Port Use this port to mount the camera to bracket Reset To restart the device Setup Device Thank you for choosing our products! Please follow below instruction to setup and use your doorbell device. 1. Downloading and installing the APP Open App Store (for iOS) or Google Play Store (for Android) on your device, search app or scan QR code as following to download the right App for your device. Smart Life www.oobsmarthome.com 2. Setting up the APP Before you begin; Make sure the APP is installed to your device Make sure that your device is connected to a 2.4GHz Wi-Fi networks, 5GHz network is NOT compatible. User Register New user register it according to guide steps, already registered user just login it 3. Add the device Before add, turn on the bluetooth on the mobile setting. Open the app and tap "Add device" Select device: Smart Doorbell Camera, and it will show the WiFi network setting. the name of the WiFi network will automatically be filled in, enter the WiFi password and tap "Next step" and confirm. www.oobsmarthome.com Follow the app instruction, press and hold the ring button for 5-10 seconds, with a voice notification "Reset successfully", the device will reset to default setting automatically. Please confirm you heard it and choose next step, the app will searching the device and add it Pairing with Chime (Optional) Pairing button Volume control Music selection Press and hold Volume button for 5 seconds until the LED indicator lights up, Wi-Fi enters into pairing status. Then press the button on the Wi-Fi video doorbell within 5 seconds, pairing is completed once LED indicator on the Chime is flashing. When above procedure is finished, pairing is quit automatically. www.oobsmarthome.com UQ-3514 VERSION V3