Cobra RAD 480i Quick Start Guide
Thank you for purchasing the new Cobra® RAD 480i. This guide will help you get started with your device.
Getting Started with the Drive Smarter® App
Download the Drive Smarter® app to receive advance warning of laser and radar alerts from other connected detectors, easily adjust your features, alerts, and settings on any supported device, and update your device software through the app. Download today!
Available on the App Store and Google Play.
Full manual available at: eu.cobra.com/manuals
Mounting Options
Dashboard Mounting Option
- Attach Hook & Loop: Attach the included hook and loop fastener to the detector.
- Attach to Dashboard: Secure the detector to the dashboard surface using the attached hook and loop.
- Connect Power: Connect the detector to a 12V power source using the provided power cord. ↓
Windshield Mounting Option
- Assemble Bracket: Assemble the suction cup bracket by attaching the arm to the base.
- Adjust Bracket: Adjust the angle of the suction cup bracket so the RAD 480i will be level with the road.
- Mount Bracket: Firmly press the suction cup bracket onto the windshield.
- Attach Detector: Slide or clip the RAD 480i onto the mounted suction cup bracket.
- Connect Power: Connect the detector to a 12V power source using the provided power cord. ↓
Connecting to Your Smartphone via Bluetooth®
- Power on the RAD 480i.
- Download and install the Drive Smarter® app on your smartphone.
- After registering your account in the Drive Smarter® app, press the Account button and then select "Add New Device". (Note: The first time you run the app, you will be prompted to register a new account.)
RAD 480i Features
The RAD 480i features the following:
- Speaker
- Display
- Mark Button
- Menu Button
- Volume Up/Down/Power Button
- Mute Button
- Sensitivity Adjustment
- Brightness Control
- Micro USB Port
- 12V Power Port
Troubleshooting Tips
If your unit is not operating properly, please follow these troubleshooting steps:
- Make sure the power cord is properly connected to your RAD 480i.
- Make sure the socket of your vehicle's cigarette lighter or 12V accessory port is clean and free of corrosion.
- Make sure the power cord's adapter is firmly seated in the socket of the cigarette lighter or 12V accessory port and the power LED is on [power-led].
For detailed and up-to-date FAQs, please visit www.cobra.com/FAQs.
Legal and Compliance Information
FCC ID: BBORAD480
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Cobra and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation™ is a trademark of Cedar Electronics Corporation, USA. Other trademarks and trade names are those of their respective owners.
©2023 Cobra Electronics Corporation. Printed in the Philippines.