Cobra RAD 480i Quick Start Guide
Information for setting up and using your Cobra RAD 480i Connected Radar and Laser Detector.
Getting Started
Thank you for purchasing the new Cobra® RAD 480i.
Download the Drive Smarter® App
With the Drive Smarter® app, you can:
- Get advance warning of laser and radar alerts from other connected detectors.
- Easily adjust your features, alerts, and settings on any supported device.
- Update your device software through the app.
Download today:
Download on the App Store
Get it on Google Play
More information and full manual available at: www.cobra.com
Mounting Options
Dashboard Mounting Option
Step 1: Attach Hook & Loop to Detector
Apply the adhesive hook and loop strips to the bottom of the detector unit.
Step 2: Attach Detector to Dashboard Surface
Place the detector onto the desired dashboard surface, pressing firmly to secure it with the hook and loop strips.
Step 3: Connect Detector to 12V Power Source
Plug the 12V power cord into the detector and then into your vehicle's 12V accessory outlet (cigarette lighter socket).
Windshield Mounting Option
Step 1: Assemble Suction Cup Bracket
Attach the suction cup to the mounting bracket arm.
Step 2: Adjust Suction Cup Bracket
Position the bracket arm so the RAD 480i will be level with the road when mounted.
Step 3: Attach Suction Cup Bracket to Windshield
Press the suction cup firmly onto the inside of the windshield.
Step 4: Attach RAD 480i to Suction Cup Bracket
Slide the RAD 480i unit onto the mounted bracket.
Step 5: Connect Detector to 12V Power Source
Plug the 12V power cord into the detector and then into your vehicle's 12V accessory outlet (cigarette lighter socket).
Connecting to Your Smartphone via Bluetooth®
Step 1: Power on the RAD 480i.
Step 2: Download and install the Drive Smarter® app on your smartphone.
Available on the App Store and Google Play.
Step 3: Add New Device
After registering your account in the Drive Smarter® app, navigate to the Account section, press "Add New Device", and follow the on-screen instructions.
Note: The first time you run the app, you will be prompted to register a new account.
RAD 480i Features
The Cobra RAD 480i features the following components and ports:
- Speaker
- Windshield Mount Slot
- Windshield Mount Release
- Volume Up/Down/Power Button
- Menu Button
- Mark Button
- Sensitivity Button
- Brightness Button
- Display
- Mute Button
- Micro USB Port
- 12V Power Port
Included accessories:
- 12V Power Cord
- Windshield Suction Cup Bracket
- Quick Start Guide
Troubleshooting Tips
If your unit is not operating properly, please follow these troubleshooting steps:
- Ensure the power cord is properly connected to your RAD 480i.
- Verify that your vehicle's cigarette lighter or 12V accessory port socket is clean and free of corrosion.
- Confirm the power cord's adapter is firmly seated in the vehicle's socket and the power indicator light [power-indicator-light] is illuminated.
For detailed and up-to-date FAQs, please visit www.cobra.com/FAQs.
Regulatory Information
FCC ID: BBORAD480i
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC NOTE: Modifications not expressly approved by the manufacturer could void the user's FCC granted authority to operate the equipment.
Cobra and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation™™ is a trademark of Cedar Electronics Corporation, USA. Other trademarks and trade names are those of their respective owners.
©2022 Cobra Electronics Corporation. Printed in the Philippines.
