Product Information
Brand: TRUEFREE
Model: T2
Manufacturer: Shenzhen Ginto E-Commerce Co., Limited
Address: Zoom 08 13F, Block b, Huihai square, Chuangye road, Longhua street, Longhua Dist., Shenzhen, CHINA, 518000
Support: support@itruefree.com
Website: www.itruefree.com
European Representative: Qing UG (haftungsbeschränkt), Undinestr. 7, 12203 Berlin, Germany
UK Representative: TANMET INTL BUSINESS LTD, 9 Pantygraigwen Road, Pontypridd, Mid Glamorgan, CF37 2RR, UK, tanmetbiz@outlook.com
Pairing Instructions
- Open the charging case cover. The left and right earphones will automatically turn on and enter the mutual pairing state. The indicator light on one earphone will flash red and blue alternately, while the other earphone stays blue, indicating successful pairing. They then enter pairing mode.
- Turn on your device's Bluetooth and select "TRUEFREE T2" from the Bluetooth list to complete the pairing.
Resetting the Earbuds
- Place the earphones back into the charging case, ensuring they are correctly positioned.
- With the charging case lid open, press and hold the button on the charging case for 10 seconds. The lights on the earphones will flash red and blue alternately twice, indicating the reset is complete.
- Close the charging case lid and then re-open it to activate the earphones.
Wearing the Earbuds
- Identify the left earphone and the right earphone.
- Adjust the earphones to fit your ears comfortably and securely.
Touch Controls
Power On:
- Auto: Open the charging case, and the earphones turn on automatically.
- Manual: Press and hold the multifunctional button for 1.5 seconds when earphones are off.
Power Off:
- Auto: Place the earphones back into the charging case and close the case lid.
- Manual: Press and hold the multifunctional button for 10 seconds when earphones are on.
Play/Pause: Double-tap the multifunctional button.
Volume Down: Single-tap the left multifunctional button.
Volume Up: Single-tap the right multifunctional button.
Next Track: Press and hold the right multifunctional button for 1.5 seconds.
Previous Track: Press and hold the left multifunctional button for 1.5 seconds.
Answer/Hang Up Call: Double-tap the multifunctional button.
Reject Call: Press and hold the multifunctional button for 1.5 seconds.
Switch Between Calls: Press and hold the multifunctional button for 1.5 seconds.
Activate Voice Assistant: Press the right multifunctional button three times.
Activate/Deactivate Game Mode: Press the left multifunctional button three times.
Frequently Asked Questions (Q&A)
Q1: What does the indicator light of the charging case display?
Battery Life of Charging Case:
- 100%-50%: Green light
- 49%-10%: Yellow light
- Less than 10%: Red light
Charging Status of Charging Case:
- 0%-20%: Red light flashes slowly
- 21%-69%: Yellow light flashes slowly
- 70%-99%: Green light flashes slowly
- 100%: Green light stays on
Q2: How to charge the charging case?
- Connect the charging case to a Type-C charger. Ensure the current does not exceed 1A.
- If the earphones remain idle for an extended period, charge them at least every three months to prevent battery damage.
Q3: Why are the earphones still connected to the phone when they are put back into the charging case and the case lid is closed?
- Check if the charging case has battery power. If the battery is depleted, closing the lid will not disconnect the earphones from the device.
- Ensure the earphones are properly placed in the charging case and that the charging contacts on both the earphones and the charging case are clean. Use a soft cloth and a small amount of alcohol to clean the contact points.
Regulatory Information
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
French translation: Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d'interférences. (2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil.
IC: 28277-HQY003
HVIN: T2
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
