Monster Bluetooth® Multi-Color LED Light Bar

Introduction

This Bluetooth® Multi-color LED Light Bar is easy to install, easy to use, and is ideal for adding controllable ambient lighting to any room.

Features

• Multi-color and dimmable LED lighting effects
• Included color-selector remote with positionable IR receiver
• Bluetooth® app controlled
• Multi-position base for various horizontal, vertical, or wall mounting orientations
• Conveniently plugs into any 5V USB power source (not included)
• Plug and play
• Control multiple light bars simultaneously through the app

What's Included

• Bluetooth® Multi-color LED Light Bar
• IR Remote Control with battery (1 x 3V battery, CR2025)
• Multi-position Base
• Base Attachment Screws x2
• Base and IR Receiver Adhesive
• User Manual x1 pc

Safety Instructions

Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, this warranty is null and void.

• Keep these instructions.
• Do not drop, puncture, or disassemble this product.
• Do not expose this product to dripping or splashing of drinks or liquids of any kind.
• Avoid long exposure to direct sunlight, which may cause damage.
• Do not expose this product to open flames.
• Do not use the product in a strong magnetic field.
• Use a clean, soft cloth to clean. Do not use any corrosive cleaners/oils to clean.
• Do not attempt to repair the device or open the unit as this will void the warranty.

Specifications

• LED Light Bar (USB): 5V
• Output: 1.5W
• Cable length: 5ft
• Remote control: 3V (1 x 3V battery, type CR2025)

Get Started

1. Determine Installation Location and Orientation

   Choose where and in what orientation you would like to use your Bluetooth® Multi-color LED Light Bar. The light bar can be mounted horizontally, vertically, or on a wall.

   Diagram Description: The image shows three mounting options. The first shows the light bar lying flat on a surface, labeled "HORIZONTAL". The second shows the light bar standing upright on its base, labeled "VERTICAL". The third shows the light bar attached to a wall, labeled "WALL MOUNT".

2. Prepare the Multi-position Base

   Pass the USB power cord and the IR receiver through the opening in the multi-position base.

   Diagram Description: An illustration shows the USB power cord and IR receiver cable being threaded through a slot in the multi-position base. An arrow indicates the direction of the cables.

3. Attach the Base

   For horizontal or wall-mounted orientations, attach the base in the center of the light bar using the two included screws. For vertical orientation, route the cord through the cord channel and attach the base at the end of the light bar.

   Diagram Description: Two diagrams illustrate base attachment. The left diagram shows the light bar in a vertical orientation, with the cord routed through a channel along the back of the bar, and the base attached at the bottom end. Text notes: "to avoid cord damage, don't pull the cord tight" and "using the cord channel makes the vertical light bar more stable". The right diagram shows the light bar in a horizontal orientation, with the base attached to the center underside using screws. An inset "wall mounted tip" shows the base being attached to a surface, with an arrow pointing to an adhesive pad and text indicating "this side UP". It also mentions using a screw and anchor (not included) as an alternative.

4. Position the IR Receiver

   Position the IR receiver in a location where it can receive a signal from the IR remote. Secure the receiver using the included adhesive tape if desired.

5. Prepare the Remote Control

   Remove the battery pull tab from the battery compartment of the remote control to activate it.

6. Connect Power

   Connect the USB cable to a powered USB port or wall charger (a 1A adapter is required and not included).

Controls, at a Glance

The product includes an IR Remote and an in-line IR Receiver.

IR Remote Functions

Diagram Description: An image displays the IR remote control with numbered buttons corresponding to the table above. It also shows the in-line IR receiver unit.

IR Remote Operation

1. Turn on the LED Light by pushing the ON button on the remote control.
2. Select the desired color or effect by pushing the corresponding button on the remote control.
3. Set the desired brightness using the buttons to increase/decrease the intensity of color.
4. Push the OFF button to turn off the LED Light.

Changing the Remote Control Battery

The battery for the remote control has already been installed. Remove the battery pull tab to operate.

1. The battery compartment is located on the narrow side of the remote control.
2. Remove the empty battery and insert a 3V battery, type CR2025, with the positive terminal pointing upwards.
3. Place the battery compartment back in the remote control so it locks in place.

Bluetooth® App Operation

1. Download the free Monster Basics Light Control app from the App Store or Google Play.
2. Enable Bluetooth® connectivity on your device. Open the Monster Basics Light Control app and locate your Monster LED Light Bar in the equipment section. Select the device in the list to connect.
3. Once connected, you can control color, brightness, color-changing modes and speeds, music reactive features, and on/off scheduling.

NOTE: Your LED Light Bar must be connected to power and your phone must have Bluetooth enabled and be within range to operate.

Color Control (App Interface)

The app provides various controls for the light bar:

• ON/OFF
• COLOR SPECTRUM WHEEL
• BRIGHTNESS ADJUST
• COLOR SELECT
• SPEED ADJUST
• COLOR-CHANGING MODES
• MENU ITEMS

Diagram Description: A smartphone screen displays the Monster Basics Light Control app interface. It shows a color spectrum wheel, sliders for brightness and speed, and buttons for various modes and color selections. Labels point to these elements, including ON/OFF, COLOR SPECTRUM WHEEL, BRIGHTNESS ADJUST, COLOR SELECT, SPEED ADJUST, COLOR-CHANGING MODES, and MENU ITEMS.

Customer Service

• 1 Year Limited Warranty
• Phone: 866-246-2008
• Email: customerservice@monsterilluminessence.com

In the event this product becomes defective, please do not return this product to your retailer.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's warranty or authority to operate the equipment.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed or mobile condition. The minimum separation distance is 20cm.

The illustrated products and specifications may differ slightly from those supplied. The M Monster logo is a registered trademark of Monster, Inc. or its subsidiaries in the U.S. and other countries and are used under license. All other brand names are trademarks of their respective owners. Neither Jem Accessories, Inc. nor Monster, Inc. is affiliated with the respective owners of their trademarks. Licensed and Manufactured by Jem Accessories, Inc. South Plainfield, NJ 07080. Made in China.