MONSTER™ BLUETOOTH® SOUND REACTIVE RGB LED CAR INTERIOR LIGHTS

Introduction

These car interior LED accent lights are the perfect addition to light up any automobile interior. Place them under the dash in the footwell of the driver and passengers seats for subtle illumination. They require no hard wiring, just simply peel, stick, and plug in into your cars DC adapter. Customize your color experience via app with 4 interior LED lighting strips.

Features

• Enhance your car interior with 4 - 10.5" customizable LED strips
• Control colors and flash modes with App
• Self adhesive backing for easy application
• Powered with included 12V car DC adapter

What's Included

• 4 - 10.5" RGB Color Changing LED Strips w/ DC Adapter
• Downloadable App

Installation

1. Clean the surface you intend to stick the light strip on.
2. Peel off the backing strip off the 3M adhesive tape.
3. Press and hold the light strip firmly against the surface.
4. Plug the DC Adapter into your car's 12V DC power socket.
5. Plug the other end of the DC adapters cord into the LED lighting Controller.
6. To power your LED lights, with power to your vehicle's 12V DC port*, press the red power button on the end of DC adapter. The LED strips will illuminate.

*Note: Most vehicles must be on to supply power to its 12V outport socket.

Setup

In addition to using the controller, you can also use the app to control your LED lighting.

Before starting, check that your phone's Bluetooth and data connection are turned on.

1. To download the Monster Smart App, scan the Android or iOS (Apple) QR code below with a QR code scanning app on your mobile device, or search for the Monster Smart app in the Apple or Google Play store. Download the App.

ANDROID QR Code

iOS QR Code

Manual Operation

1. Press the red power button on the end of DC adapter to power on your LED lights.
2. Press the controller's multifunction for 5 seconds until the LEDs are flashing red to indicate that the controller is in pairing mode.
3. Double click the multifunction button to turn the lights on and off.
4. Single click the multifunction button to cycle through the 8 lighting modes, including the sound reactive mode.
5. Long press: long press for 5 seconds to enter Bluetooth pairing mode (LEDs will flash red).
6. Open the app, follow the instructions to add your LED Lights.
7. Customize your LED lights with color and mode options, sound reactive music mode, and set schedules for lighting effects in the app.

App supports iOS 10.0 or higher, and Android 4.4 or higher

Safety Instructions

Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, this warranty is null and void.

• Keep these instructions.
• Do not drop, puncture, or disassemble this product.
• Do not expose this product to dripping or splashing of drinks or liquids of any kind.
• Avoid long exposure to direct sunlight, which may cause damage.
• Do not expose this product to open flames.
• Do not use the product in a strong magnetic field.
• Use a clean, soft cloth to clean. Do not use any corrosive cleaners/oils to clean.

Customer Service

• 1 Year Limited Warranty
• Scan QR code for warranty information
• 866-246-2008
• customerservice@monsterilluminessence.com

In the event this product becomes defective, please do not return this product to your retailer.

Specifications

• LED Length: 10.5" each
• Voltage Supply: 12V 2A
• App supports iOS 10.0 or higher, and Android 4.4 or higher

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's warranty or authority to operate the equipment.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed or mobile condition. The minimum separation distance is 20cm.

Multilingual Support

Need the Quick Start Guide in another language?

• EN: English
• FR: Français
• ES: Español
• DE: Deutsch
• IT: Italiano
• RU: Русский

Scan for manuals: www.monsterilluminessence.com/manuals/

The illustrated products and specifications may differ slightly from those supplied. The M Monster logo is a registered trademark of Monster, Inc. or its subsidiaries in the U.S. and other countries and are used under license. All other brand names are trademarks of their respective owners. Neither Jem Accessories, Inc. nor Monster, Inc. is affiliated with the respective owners of their trademarks. Licensed and Manufactured by Jem Accessories, Inc. South Plainfield, NJ 07080. Made in China.