ID-COOLING IS Series Installation Guide

Version: 20220221 V2 V17

Brand: ID-COOLING (Ideas To Make A Difference)

Components List

The following components are included:

• Cooler ×1
• LGA1200/115X Bracket ×2
• LGA1700 Bracket ×2
• AM4 Bracket ×2
• Bracket Screw ×4
• Tightening Screw ×4
• Washer ×4
• Thermal Grease ×1

Intel LGA1700/LGA1200/LGA115X Installation

1. Mount the correct brackets with the bracket screws. The socket type is indicated on the brackets.
2. Clean the CPU surface and apply a thin layer of thermal grease.
3. Place the cooler onto the CPU.
4. Place the washer on the back of the motherboard, insert the tightening screws, and then secure the cooler firmly.
5. Connect the CPU fan cable to the "CPU_FAN" header on the motherboard.

AMD AM4 Installation

1. Remove the plastic retention frame and backplate from the motherboard.
2. Mount the brackets with the bracket screws.
3. Clean the CPU surface and apply a thin layer of thermal grease.
4. Place the cooler onto the CPU.
5. Place the washer on the back of the motherboard, insert the tightening screws, and then secure the cooler firmly.
6. Connect the CPU fan cable to the "CPU_FAN" header on the motherboard.

Important Notes and Support

• If you are unsure about the installation process, please seek professional assistance.
• Ensure your PC is powered off and disconnected from the power source before installation.
• For any doubts regarding the components list or the product itself, please contact your original reseller or retailer.
• ID-COOLING is available to provide support. Contact information can be found below.
• Descriptions are for reference only. Different models may have variations in components and appearance.

Manufacturer: SHENZHEN BUYEASY CO., LTD.

Website: www.idcooling.com

Support Email: support@idcooling.com