Kodak S2000f/S3000 Series Scanners Reference Guide

Supplies, Accessories, and Consumables

For information on supplies and accessories, please visit:

AlarisWorld.com/go/supplies

Maintenance Procedures

Replacing Pre-separation Pad

The pre-separation pad is a consumable part. Refer to the User's Guide for detailed replacement procedures.

(Image description: A scanner component showing a part labeled '1' with a green arrow indicating its location.)

Replacing Separation Roller

The separation roller is a consumable part. Refer to the User's Guide for detailed replacement procedures.

(Image description: A scanner component showing parts labeled '1' with green arrows indicating their location.)

(Image description: A scanner component showing a part labeled '2' with a green arrow indicating its location.)

For detailed procedures on replacing the feed module and front transport roller, consult the User's Guide.

Installation

The following steps are required to set up and connect your scanner to your computer:

1. Unbox your scanner.
2. Set up your scanner for the first time.
3. Install driver software.
4. Verify the scanner’s firmware.
5. Optionally update the scanner’s firmware.
6. Optionally install available Kodak scanning software.

For more detailed instructions, refer to Section 2 of the User Guide, which can be found on the website:

AlarisWorld.com/go/IMsupport

Scanner Operation and Indicators (OCP TIPS)

Understanding the Operator Control Panel (OCP) indicators:

• Document count: Tracks the number of documents scanned.
• Paper Present Indicator: This icon is displayed when no paper is detected in the scanner.
• USB Connection: Indicates the scanner is connected to a computer via USB.
• Network Connection: Indicates the scanner is connected to the Wired Network.

When the "[tire icon]" appears on the scanner's touch screen, it indicates that cleaning the scanner or replacing consumables (such as rollers or tires) is recommended. Refer to "Maintenance", Section 5 of the User Guide for guidance. This icon is displayed only if one of the maintenance meters has expired.

Cleaning Procedures

Clean the Transport, Rollers, and Background Strips

(Image description: A hand inserting a cleaning sheet into the scanner's paper path.)

(Image description: A hand cleaning rollers inside the scanner.)

(Image description: A hand cleaning rollers inside the scanner.)

Running a Transport Cleaning Sheet and Cleaning the Imaging Guides

(Image description: A hand inserting a cleaning sheet into the scanner.)

(Image description: A hand cleaning the imaging guides within the scanner.)

Cleaning the Flatbed Glass (for the S2085f/S3060f/S3100f Scanners only)

(Image description: A hand cleaning the flatbed glass of the scanner.)

For detailed cleaning and replacement procedures, consult Section 5, Maintenance, in the User's Guide.

Support Information

When contacting support, please have the following information readily available:

• A description of your problem.
• Scanner model and serial number.
• Computer configuration.
• Software application you are using.

Additional support resources can be found at:

AlarisWorld.com/go/IMsupport