Introduction
This guide provides detailed instructions for configuring the ISIS driver for Kodak S2000f and S3000 series document scanners. It covers essential setup procedures, image settings, scanner configurations, and sorting options to optimize document scanning workflows.
Supported Scanners
The guide is applicable to the following Kodak scanner models:
- KODAK S2085f Scanner
- KODAK S3060 Scanner
- KODAK S3060f Scanner
- KODAK S3100 Scanner
- KODAK S3100f Scanner
- KODAK S3120 Scanner
- KODAK S3120 Max Scanner
- KODAK S3140 Max Scanner
- (Also references i5650S, i5850S, i5200 models for specific features)
Key Configuration Areas
Users can configure various aspects of the scanning process, including:
- ISIS Driver Setup: Using the Scan Validation Tool (SVT) for diagnostics and initial setup.
- Image Settings: Adjusting image modes, resolution (dpi), cropping, binarization, and color detection.
- Scanner Settings: Configuring document feeder options, sheet counters, timeouts, and intelligent document protection.
- Multifeed and Patch Detection: Managing document feeding issues and using patch codes for workflow control.
- Imprinting and Indexing: Adding digital stamps, counters, and organizing scanned documents with image addressing.
- Sorting Options: Setting up rules for sorting documents based on multifeed, size, patch type, or barcode data.
Purpose
The document aims to guide users through the process of optimizing their scanning environment by leveraging the capabilities of the ISIS driver and the Scan Validation Tool, ensuring efficient and accurate document capture.
Scanner Support and Drivers | Kodak Alaris
