Smart Display
Available Sizes: 15.6", 21.5", 23.8", 32"
Important Notices
Copyright Information: All intellectual property rights in this publication are owned by and protected by applicable copyright laws and international treaty provisions. SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.. SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate, or complete or otherwise, and on express understanding that SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use. All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders. This device complies with CE and FCC regulations.
- Do not push objects into holes and ventilation slots.
- Do not expose this product to moisture or place any objects filled with liquids on or near the product.
- Do not place a naked flame source, such as lighted candles, on or near this product.
- Do not store or operate the device in environments where the temperature is above 50 degrees Celsius or below -10 degrees Celsius.
- Do not intentionally hit the device or place heavy or sharp objects on the device.
- Only use accessories specified by the manufacturer.
- Keep the device away from benzene, diluents, and other chemicals.
- Do not attempt to repair this product yourself. Always use a qualified service agent to perform adjustments or repairs.
Package Contents
Please make sure all of the following are present when you unpack your Smart Display:
Smart Display Unit
Illustration of the Smart Display unit.
Wall Mount
Illustration of a wall mounting bracket.
Power Cord (for 15.6" model)
Illustration of a power cord.
Power Cord (for 21.5"/23.8"/32" models)
Illustration of a power cord.
Adapter (for 21.5"/23.8"/32" models)
Illustration of a power adapter.
Screws (e.g., PM4.0*13mm, M4*46mm, M4*69mm, KA4.0*30mm)
Illustrations of various screws for mounting and assembly.
Wall Plugs
Illustrations of wall plugs for installation.
EVA Cotton
Illustrations of EVA cotton padding.
User Manual
Illustration of a user manual booklet.
Product Specifications
Specifications vary by model configuration.
| Category | Specification | Details |
|---|---|---|
| CPU | RK3588S2 | Quad core cortex A55 + Quad core cortex A76 |
| RK3576 | Quad core cortex A53 + Quad core cortex A72 | |
| RK3568 | Quad core cortex A55 | |
| RK3399 | Dual core cortex A72 + Quad core cortex A53 | |
| RAM | 4GB | |
| Internal memory | 32GB | |
| Operation system | Android | |
| Panel Size | 15.6" / 21.5" / 23.8" / 32" LCD | |
| Resolution | 1920*1080 / 3840*2160 (4K) | |
| Model Type | Capacitive touch screen | |
| Touch Points | 10-Point | |
| Aspect Ratio | 16:9 | |
| Wi-Fi | IEEE 802.11b/g/n/a/ac/ax (Wi-Fi 6) with Mu-MIMO standard (RK3588S2); IEEE 802.11b/g/n/a/ac/ax (Wi-Fi 6E) (RK3567); IEEE 802.11b/g/n/a/ac (RK3568/RK3399) | |
| Bluetooth | 5.3 (RK3588S2/RK3576) / 5.4 (RK3399/RK3568) | |
| Interface | Type-c | *1 |
| USB Host | *2 | |
| HDMI IN | *1 | |
| RJ45 | Ethernet interface | |
| VESA Mount | 75x75mm (15.6", 21.5") / 100x100mm (23.8", 32") | |
| Button | Power/Vol+/Vol- | |
| G-sensor | Support | |
| Speaker | *2 | |
| Microphone | Support | |
| Storage Temperature | -20°C to 60°C | |
| Working Temperature | 0°C to 40°C (20~80% RH) | |
Exterior Components
15.6" Exterior Components
Front View:
Illustration showing the front of the 15.6" display with dimensions: 370.0mm width, 344.76mm height, 14.7mm depth. Bezels are approximately 24.7mm on top/bottom and 15.5mm on sides.
Back View:
Illustration showing the back of the 15.6" display with VESA 75x75mm mounting points. Numbered ports are indicated.
| No. | Function |
|---|---|
| 1 | Microphone |
| 2 | Camera |
| 3 | DC in power supply port |
| 4 | HDMI IN |
| 5 | Type-c |
| 6 | USB host |
| 7 | USB host |
| 8 | Ethernet Port |
| 9 | Volume + |
| 10 | Volume - |
| 11 | Power key |
| 12 | VESA 75x75mm |
21.5" Exterior Components
Front View:
Illustration showing the front of the 21.5" display with dimensions: 506.9mm width, 476.0mm height, 32.2mm depth. Bezels are approximately 16.7mm on top/bottom and 15.5mm on sides.
Back View:
Illustration showing the back of the 21.5" display with VESA 75x75mm mounting points. Numbered ports are indicated.
| No. | Function |
|---|---|
| 1 | Microphone |
| 2 | Camera |
| 3 | DC in power supply port |
| 4 | HDMI IN |
| 5 | Type-c |
| 6 | USB host |
| 7 | USB host |
| 8 | Ethernet Port |
| 9 | Volume + |
| 10 | Volume - |
| 11 | Power key |
| 12 | VESA 75x75mm |
23.8" Exterior Components
Front View:
Illustration showing the front of the 23.8" display with dimensions: 554.1mm width, 526.6mm height, 34mm depth. Bezels are approximately 16.7mm on top/bottom and 17.3mm on sides.
Back View:
Illustration showing the back of the 23.8" display with VESA 100x100mm mounting points. Numbered ports are indicated.
| No. | Function |
|---|---|
| 1 | Microphone |
| 2 | Camera |
| 3 | DC in power supply port |
| 4 | HDMI IN |
| 5 | Type-c |
| 6 | USB host |
| 7 | USB host |
| 8 | Ethernet Port |
| 9 | Volume + |
| 10 | Volume - |
| 11 | Power key |
| 12 | VESA 100x100mm |
32" Exterior Components
Front View:
Illustration showing the front of the 32" display with dimensions: 735.6mm width, 697.3mm height, 36.5mm depth. Bezels are approximately 17.2mm on top/bottom and 29mm on sides.
Back View:
Illustration showing the back of the 32" display with VESA 100x100mm mounting points. Numbered ports are indicated.
| No. | Function |
|---|---|
| 1 | Microphone |
| 2 | Camera |
| 3 | DC in power supply port |
| 4 | HDMI IN |
| 5 | Type-c |
| 6 | USB host |
| 7 | USB host |
| 8 | Ethernet Port |
| 9 | Volume + |
| 10 | Volume - |
| 11 | Power key |
| 12 | VESA 100x100mm |
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet general RF exposure requirement.
This device complies with parts of the FCC rules. Operation is subject to the following two conditions: This device will not cause harmful interference; This device must accept any interference received, including that which may cause undesired operation.
CE Marking and Environmental Information
This product complies with the essential requirements of European safety regulations and has passed the product safety conformity assessment procedure. It also has a manufacturer's declaration of conformity to ensure that every product delivered to the customer is safe.
Environmental Disposal: This symbol ♻️ on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in your country. For more information, please contact the local authority or your retailer where you purchased the product.
