24" & 32" Digital Signage User Manual
Important Notices
Copyright Information
All intellectual property rights in this publication are owned by and protected by applicable copyright laws and international treaty provisions. This publication retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval. The manufacturer reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate, complete, or otherwise. It is provided on an express understanding that the manufacturer shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use. All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders. This device complies with CE and FCC regulations.
Safety Precautions:
- Do not push objects into holes and ventilation slots.
- Do not expose this product to moisture or place any objects filled with liquids on or near the product.
- Do not place a naked flame source, such as lighted candles, on or near this product.
- Do not store or operate the device in environments where the temperature is above 50 degrees Celsius or below -10 degrees Celsius.
- Do not intentionally hit the device or place heavy or sharp objects on the device.
- Only use accessories specified by the manufacturer.
- Keep the device away from benzene, diluents, and other chemicals.
- Do not attempt to repair this product yourself. Always use a qualified service agent to perform adjustments or repairs.
Package Contents
Please make sure all of the following are present when you unpack your Digital Signage:
- Digital Signage Unit
- Power Adapter
- User Manual
Introducing the Android Interactive Digital Signage
- LCD full IPS panel
- Resolution: 1920*1080
- Processor: RK3399 Dual core cortex A72+Quad core cortex A53 / RK3588 Quad core cortex A55+Quad core cortex A76
- RAM: 4GB, Optional 8GB (RK3588)
- Internal Memory: 32GB, Optional 64GB
- Operating System: Android 11 (RK3399), Android 12 (RK3588)
- Touch: 10-Point capacitive touch
- Network: RJ45 Ethernet
- Wireless: WiFi 802.11b/g/n/a/ac (RK3399), WiFi 802.11b/g/n/a/ac/ax (WiFi 6) (RK3588)
- Bluetooth: 5.0
- Ports: Ethernet interface, HDMI IN, 3.5mm earphone output, External microphone input, Type-c
- Expansion: Optional 4G Module
- USB: Standard USB 2.0 Host, Optional USB Touch function, USB 3.0*2
- Audio: Speaker 4Ω*5W*2
- Mounting: VESA: 100x100mm
Exterior Components
24" Model
Dimensions: Width: 527.04mm, Height: 296.46mm, Depth: 27.8mm (front bezel), 13.7mm (overall).
Port Layout (Bottom/Back View):
| No. | Function | No. | Function |
|---|---|---|---|
| 1 | Voice tube input | 9 | HDMI IN |
| 2 | Earphone | 10 | DC in power supply port |
| 3 | Ethernet Port | 11 | Microphone |
| 4 | SIM (Optional) | 12 | VESA 100x100mm |
| 5 | USB 3.0 host | 13 | Volume + |
| 6 | USB 3.0 host | 14 | Volume - |
| 7 | USB/Touch | 15 | Power key |
| 8 | Type-c |
32" Model
Dimensions: Width: 699.4mm, Height: 432mm, Depth: 37mm (overall).
Port Layout (Bottom/Back View):
| No. | Function | No. | Function |
|---|---|---|---|
| 1 | Voice tube input | 9 | HDMI IN |
| 2 | Earphone | 10 | DC in power supply port |
| 3 | Ethernet Port | 11 | Microphone |
| 4 | SIM (Optional) | 12 | VESA 100x100mm |
| 5 | USB 3.0 host | 13 | Volume + |
| 6 | USB 3.0 host | 14 | Volume - |
| 7 | USB/Touch | 15 | Power key |
| 8 | Type-c |
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- (1) This device may not cause harmful interference, and
- (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FC
End-of-Life Disposal
This symbol [WEEE recycling symbol] on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in your country. For more information, please contact the local authority or your retailer where you purchased the product.
