Ravemen TR20 Rear Light
Introduction
Thank you for purchasing a Ravemen product. Important: For your safety, read this manual thoroughly before using the product and keep it properly for future reference.
Scan and like our Facebook page for more info and service: www.ravemen.com
Customer service: service@ravemen.com
Technical Specifications
- LED: High efficient COB LED
- Battery: 200mAh/3.7V rechargeable Li-polymer battery
- Dimensions (light unit): 22mm (L)*18mm (W)*52mm (H)
- Weight (light unit): 15g
- Package includes: Tail light*1, Base mount *1, O ring *2, USB cable*1, Silicone shim *1
Performance Parameters
| Mode | Run time (hrs) | Impact resistance | Water resistance |
|---|---|---|---|
| High | 1.5 | 1 meter | IPX4 anti-spray |
| Low | 4 | ||
| Flashing | 10 | ||
| Rapid flashing | 10 | ||
| Pulse flashing | 11 |
Note: The above data are tested in Lab standard and may vary by environment and user conditions.
Quick Guide
- Power button: Long press the button 0.5s to turn on/off power; Single click to cycle through modes.
- Auto power save and battery indicator: When in low power, the light will switch to flashing mode automatically with the blue indicator light flashing. Please charge your light soon.
- USB-C charging: Standard charging time: 2.0h (Max input: 5V, DC/150mA). Built-in over-charge protection. Note: the light cannot be turned on or used while charging.
- Charging indicator: Flashing blue light during charging and constant blue light when charging completed.
- Other features: Mode Memory circuit to remember the last used brightness level.
Mounting Your Light
Fix the base mount with the O ring to the seat post (Ø 24-36mm) or compatible helmet. Then, slide the light into the base mount. For some seat bags or backpacks, the light could be attached to them directly.
Diagram Description: The diagram illustrates how to attach the base mount to a bicycle seat post or helmet using the O-ring, and then slide the light unit onto the secured mount. It also shows the light being attached directly to a seat bag.
Attention & Safety
Attention!
- Make sure the light is mounted securely each time before riding.
- Release the light from the bike while in the outdoors in case of theft.
- To maintain the best performance and extend the life of the Li-polymer battery, it's recommended:
- Check the battery and charge the battery up before your first riding.
- Avoid completely discharging, allow partial discharges and avoid over charging (usually).
- Keep and storage your light at room temperature.
- Charge your light to 50% full every 3 months for long term storage.
Alert!
Do not disassemble or modify the light, otherwise it may cause danger and void your warranty. [⚠️]
Danger!
Li-polymer battery inside, do not put the light in a fire, otherwise it may cause explosion! [?]
Please charge the light with a qualified USB power adapter. Using a defective USB power adapter may cause power leakage or fire disaster, etc. Ravemen is not responsible for any of such consequences.
Warranty
Ravemen warrants its lights to be free of defects in material and workmanship for 2 years from the day of purchase under normal use. Accessories and spare parts are warranted for 1 year.
If a covered defect occurred, return the product to the place of purchase. If this happens within 15 days from the day of purchase, Ravemen will replace the defective product with a brand new one without extra charges. After 15 days, handling and transportation charges shall be borne by the person desiring service.
Limited lifetime warranty is also available after the 2-year warranty period, with service and spare parts costs charged accordingly.
Warranty Exclusions:
- Without original sales receipt or proof of purchase.
- Normal wear and tear and normal battery deterioration.
- Unauthorized modifications or alterations, improper use and maintenance.
Certifications
CE FC ROHS
