Ravemen FR160 Bicycle Front Light User Manual
Thank you for purchasing a Ravemen product. For your safety, please read this manual thoroughly before using the product and keep it properly for future reference.
Technical Specifications
- LED: High-efficiency COB LEDs
- Battery: 380mAh/3.7V rechargeable Li-polymer battery
- Dimensions (light unit): 75mm(L)*57mm(W)*21mm(H)
- Weight (light unit): 55g
- Package includes: Front light *1, USB C cable *1
Performance Parameters
| Mode | Brightness (lumens) | Run time (hrs) | Impact resistance | Water resistance |
|---|---|---|---|---|
| High | 50 | 4 | 1 meter | IPX6 |
| Mid | 25 | 6.5 | ||
| Low | 10 | 13.5 | ||
| Warning flashing | 160 | 5.3 | 1 meter | IPX6 |
| Rapid flashing | 25 | 12.5 | ||
| Slow flashing | 50 | 8 |
Note: The above data are tested in lab and may vary by environment and user conditions.
Quick Guide
Operation
The light features a single power button. A long press (0.5s) turns it on/off, while a single click cycles through modes.
Battery Indicator
The battery indicator shows status with a solid red light when battery is below 20% and a blinking red light when below 5%. The charging indicator blinks red while charging and turns solid red when fully charged.
USB C Charging
Standard charging time: 1.6 hours with max input: 5V, DC/380mA. (Approximate values and may vary by user conditions). Built-in over-charge protection.
Charging Indicator
- Flashing red indicator: charging.
- Solid red indicator: fully charged.
Mounting Instructions
Parts for Wahoo and Bryton computers are sold separately.
The mounting system can be adapted for Wahoo and Bryton computers using specific inserts. The default mount (likely for Garmin) can be disassembled and replaced with the correct Wahoo or Bryton parts. A tether is recommended for securing the computer.
Compatibility
- For Wahoo: Requires specific inserts.
- For Bryton: Requires specific inserts.
- For Garmin: Uses the default mounting system.
Follow the figure to disassemble the parts for Garmin and replace them with the parts for Wahoo/Bryton in the right direction.
Attention and Warnings
Mounting Security
Attention! Make sure the light is mounted securely each time before riding. Release the light from the bike while in the outdoors in case of theft.
Battery Care
To maintain the best performance and extend the life of the Li-polymer battery, it's recommended:
- 1. Check the battery and charge it up before your first riding.
- 2. Avoid complete discharge; allow partial discharges and avoid overcharging.
- 3. Keep and store your light at room temperature.
- 4. Charge your light to 50% full every 3 months for long-term storage.
General Warnings
Alert! Do not disassemble or modify the light, otherwise it may cause danger and void your warranty.
Danger!
Contains a Li-polymer battery. Do not put the light in fire, otherwise it may cause explosion! Please charge the light with a qualified USB power adapter. Using a defective USB power adapter may cause power leakage or fire disaster. Ravemen is not responsible for any such consequences.
Warranty
Ravemen warrants its lights free of defects in material and workmanship for 2 years from the day of purchase under normal use. Accessories and spare parts are warranted for 1 year.
If a covered defect occurs, return the product to the place of purchase. For replacements within 15 days, there are no extra charges. After 15 days, handling and transportation charges apply. Limited lifetime warranty is available after the 2-year period with applicable service and parts costs.
Warranty Exclusions:
- 1. Without original sales receipt or proof of purchase.
- 2. Normal wear and tear and normal battery deterioration.
- 3. Unauthorized modifications or alterations, improper use and maintenance.
Certifications
The product complies with CE, RoHS, and FCC standards, indicated by logos on the packaging and product.
