MiniFinder Pico User Manual

Product Contents

The package includes:

• 1. MiniFinder Pico
• 2. Magnetic charging cable
• 3. Wall adapter

Visual Description: The image shows the MiniFinder Pico device, a magnetic charging cable, and a wall adapter, neatly arranged.

Product Usage

1. Charge before first use: Charge the device for at least 4 hours before the first use.
2. During charging: The blue LED light will be solid while charging. The blue LED light turns off when the device is fully charged.
3. Charge the device: Attach the magnetic charging cable to the charging contacts on the device.
4. Start the device: Press and hold the Power/On-Off button for 3 seconds to turn on the device.
5. Turn off the device: Press and hold both the SOS button and the Power/On-Off button for 2 seconds to turn off the device.

Device Diagram: The device has a Power/On-Off button, a voice message button, an SOS button, a microphone, a speaker, and charging contacts.

Explanation of LED Indicators

GREEN LED:

• Blinking repeatedly = Ringing
• Blinking once = Searching for GSM network
• Blinking twice = Connected to GSM network

RED LED:

• Slow blinking = Charging in progress
• Solid light = Fully charged

BLUE LED:

• Slow blinking = Searching for GPS signal
• Blinking twice = Connected to satellite

Explanation of Voice Messages

• A: Your mobile safety alarm is charging: Your MiniFinder Pico is connected to a power source and is charging.
• B: Battery low, charge battery: The battery level on your MiniFinder Pico is low, and you should charge it. The message repeats three times.
• C: Your alarm has been activated, press the SOS button to cancel the alarm: The SOS alarm has been activated. Press the MiniFinder button to cancel the alarm before it starts ringing.
• D: Fall alarm has been activated, press the SOS button to cancel the alarm: The fall alarm has been activated on your MiniFinder Pico. Press the MiniFinder button to cancel the alarm.
• E: Calling contact number X: The device is now calling the authorized phone numbers you have set up in the app. It will proceed to the next number if the current one does not answer.

Getting Started – Download MiniFinder Live

To start using your MiniFinder Pico, you first need to download the MiniFinder Live app. If you are reading this guide on your mobile, you can simply click on the icons for Google Play or the App Store to go directly to the download page. Alternatively, you can open the App Store or Google Play manually and search for "MiniFinder Live" to install the app.

Visual Description: Images show the Google Play Store and Apple App Store icons, with text indicating where to download the app.

Introduction to MiniFinder Live

Welcome to MiniFinder Live – a system designed to offer real-time positioning, smart alarms, and valuable insights that enhance personal safety and independence. Together with the MiniFinder Pico, you gain access to intelligent alarm systems, notifications, and useful tools that support your safety and daily routine. This manual provides step-by-step instructions on how to use MiniFinder Live effectively. Follow the instructions to get started and make the most of your experience.

Overview

Once the app is installed, the first step is to create an account. Tap on "Create Account", enter your email address, and create a password to get started. After logging in, an overview of the app will be displayed, as shown on the right side.

Visual Description: The images show the app's login screen and the main map view with a user icon and navigation elements.

Menu

To open the quick menu, press the MiniFinder button. This gives you quick access to important functions such as Tags, Geofence, and the Scanner tool. For more options, use the main menu located in the top-left corner of the screen. By tapping it, you can access your profile, devices, contacts, reminders, and much more.

Visual Description: The images show the app's map view with quick menu icons and the main menu with various options like "My account", "Devices", "Contacts", etc.

Add a New Device

To add a new device to your account, go to the menu in the top-left corner of the screen and select "Devices". Then, tap the plus sign. You will now have the option to scan the barcode on your MiniFinder packaging to automatically fill in the IMEI number. If the packaging is not available, you can enter the IMEI number manually instead. Give your device a name and finally tap "Add device".

Visual Description: The images show the process of adding a device, including scanning a barcode and confirming the addition.

Choose Subscription

You will automatically be redirected to the subscription selection page. Choose the subscription that best suits your needs and follow the steps to complete the purchase.

Device List

You can now find your device in the Device List, located under "Devices" in the main menu. By expanding the dropdown menu for your device, you get access to more options, including:

• A: Show on map – View the device's current position.
• B: Device settings – Adjust settings for positioning and alarms.
• C: Profile – Edit device information.
• D: Log – View event history.
• E: Comments – Add comments related to the device.

These tools help you manage your device easily.

Visual Description: The images show the device list in the app, with options to view the device on the map, access settings, profile, log, and comments.

Device Panel

The Device Panel provides valuable insights into the device's position history and movement patterns, giving you a clearer picture of activity over time. To open the Device Panel, simply tap the device's icon directly on the map. This opens a detailed view with data such as recent routes, timestamps, and other important metrics. From the panel, you can also:

• A: Share position
• B: View history
• C: Add numbers to call
• D: Set alarms such as SOS alarm, fall alarm, and low battery alarm.

Visual Description: The images show the device panel displaying location history, movement data, and alarm settings.

Device Settings

By tapping "Settings" in the Device Panel, you will be taken to a dedicated page where you can fine-tune various functions and settings. Here you can adjust update intervals, configure alarms and notifications – all to optimize the device's performance according to your specific needs.

Alarm Notifications

To access your alarm notifications, tap the blinking clock icon in the top-right corner of the screen. This section is divided into three categories:

1. Alarm – Displays critical alarms that require immediate attention.
2. Notifications – Displays general system messages and updates.
3. History – Allows you to view all previous alarms and notifications afterwards.

In each category, you can choose to dismiss the alarm, view more information, or tap the pin icon to see the exact location of the event on the map.

Visual Description: The images show the alarm notification screen with categories for Alarms, Notifications, and History, and an example of a geofence alarm.

Create a Geofence

To create a geofence, open "Geofence" in the quick menu. Choose whether you want to draw your geofence as a polygon or a circle. If you choose a polygon, mark the desired area by placing and connecting points on the map. Then, select which device you want to associate with the geofence and define whether an alarm should be triggered upon entry, exit, or both. Finally, give your geofence a name, choose a color, and tap "Save".

Visual Description: The images show the process of creating a geofence on the map, drawing a polygon, and setting alarm preferences.

Tags

Tags allow you to mark specific locations on the map that are important for your tracking solution. To create a tag, select "Tags" in the quick menu and move the cursor to the desired location on the map. Choose the tag type, add a label, and fill in any additional information if needed. Tap "Save", and the tag will be displayed directly on the map.

Visual Description: The images show the process of creating a tag on the map, including selecting a location, adding a label, and saving the tag.

Add a Contact

To see a contact on the map or share a location, you first need to add the person as a contact. Follow the steps below to add a new contact:

1. Tap the menu in the top-left corner and select "Contacts".
2. Click the "Add contact" icon to the right of the search bar. You will have the option to synchronize contacts from your mobile phone; if you do not want this, select "No thanks".
3. Enter the email address or mobile number of the person you want to add in the search field and click the magnifying glass to search.
4. When the correct contact appears, confirm that you want to add the person. Your contact request will be sent immediately.
5. For you to be able to share locations or information from devices, the person must first approve your request.

Visual Description: The images show the process of adding a contact in the app, including searching for a contact and sending a request.

Share Location with a Contact

Sharing your location with a relative, colleague, or friend can increase safety and facilitate communication. To share your location with a contact in the app, start by tapping the menu in the top-left corner. Then go to "Contacts" and select the person you want to share your location with. When you open the contact, you can choose whether to share your own location or the location of a specific device. You can also choose to give the person full access, which means the contact will have access to all available information related to the device. Once you have confirmed the settings, the location is shared and visible to the recipient.

Visual Description: The images show the process of sharing location with a contact, including selecting the contact and choosing sharing options.

Reminder

MiniFinder Live includes a built-in calendar function to help you stay organized. To create a reminder, tap the menu and select "Reminder". Here you can schedule important events such as medication reminders, daily routines, or other tasks. Select the date, specify how often the reminder should repeat, and tap "Save". Your reminder will now appear in the calendar and help you keep track of important activities.

Visual Description: The images show the process of creating a reminder in the app, including setting the date, time, and recurrence.

Need More Help?

For support and functional documentation, go to "Help" in the main menu. There you will find step-by-step guides covering the most important functions of MiniFinder Live – designed to help you utilize the platform's full potential.

Specifications

Memory

The device is equipped with 64 MB of built-in flash memory. This memory stores GPS data when GSM coverage is lacking – for example, in rural areas, indoors, or underground. The stored position information is automatically transferred as soon as GSM coverage becomes available again.

Safety Declaration

This equipment has been tested and complies with the safety certification requirements according to specifications in EN standard: EN60950-1:2006 + A12:2011.

Important Safety Instructions

Read these instructions carefully.

Save these instructions for future reference.

Pay attention to all warnings.

Follow all instructions.

• Do not tamper with your MiniFinder®.
• Do not use abrasive cleaning agents to clean your MiniFinder®.
• Do not place your MiniFinder® in a dishwasher, washing machine, or tumble dryer.
• Do not expose your MiniFinder® to extremely high or low temperatures.
• Do not use your MiniFinder® in a sauna or steam room.
• Do not leave your MiniFinder® in direct sunlight for extended periods.
• Do not place your MiniFinder® near open flames.
• Do not attempt to disassemble your MiniFinder® – it contains no user-serviceable parts.

Recycling Information

The symbol on the product or its packaging indicates that the product must be disposed of separately from household waste when it has reached the end of its life. It is your responsibility to ensure that electronic equipment is recycled correctly at designated recycling stations to contribute to the conservation of natural resources. ♻️