NuPhy AIR60 V2 Quick Guide

System Selection

Choose your operating system:

Win mode: For Windows operating systems.
Mac mode: For macOS operating systems.

Connection Mode Selection

Select your preferred connection method:

Power Off: Turns the keyboard off.
Wired mode: Connect using a data cable.
Wireless mode: Connect wirelessly via Bluetooth or 2.4Ghz.

Note: In wired mode, a data cable is required to connect the device.

Wireless Device Connection

Bluetooth Pairing Guide

Pairing with Bluetooth devices and 2.4Ghz connection:

Use [FN] + Q/W/E/R to switch between Bluetooth 1/2/3 or 2.4Ghz devices.
Long press [FN] + Q/W/E/R for 3 seconds to enter pairing mode.
For 2.4Ghz connection: Press [FN] + R, then plug the included 2.4G receiver into your computer.

Status Indicator Guide

Leftside RGB / Rightside RGB

Understand the keyboard's status lights:

Wired mode: Indicates connection status.
Power/Battery: Shows battery level (1%-10%, 11%-95%, 96%-100%).
Caps Lock: Indicates if Caps Lock is active.
Bluetooth mode: Indicates Bluetooth connection status.
2.4G mode: Indicates 2.4Ghz connection status.
Sleep mode On/Off: Indicates sleep mode status.

Backlight Settings

Customize your keyboard's backlighting:

[FN] + /: Adjust backlight brightness (increase/decrease).
[FN] + Backspace: Switch backlight effects.
[FN] + >: Switch backlight colors.
[FN] + </>: Adjust backlight speed (decrease/increase).

Sidelight Settings

Customize the side RGB lighting:

[FN] + M + /: Adjust sidelight brightness (increase/decrease).
[FN] + M + Backspace: Switch sidelight effects.
[FN] + M + >: Switch sidelight colors.
[FN] + M + </>: Adjust sidelight speed (decrease/increase).

Sleep Mode Setting

Manage power saving features:

[FN] + 1: Turn Sleep mode on or off.

Note: If the keyboard is inactive for 6 minutes, it will automatically turn off lights and enter sleep mode to conserve battery. It is recommended to keep sleep mode enabled for extended battery life.

Other Key Combos

Additional functions:

[FN] + {: Enable/disable permanent battery level display.

Factory Reset

Restore the keyboard to its default settings:

Long press [FN] + 1 for 3 seconds to reset to factory settings.

VIA Keymap Configurator

VIA is an open-source software for customizing keymaps, developed independently from NuPhy. For the latest releases, visit nuphy.com/pages/console.

If your keyboard is not detected by VIA in wired mode, please contact NuPhy technical support.

Keymap Layers: Mac Mode uses LAYER 0/1, Win Mode uses LAYER 2/3.

Regulatory Information

IC Warning (Industry Canada)

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, try to correct it by:

Reorienting or relocating the receiving antenna.
Increasing the separation between the equipment and receiver.
Connecting the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consulting the dealer or an experienced radio/TV technician.