SoundPEATS Halo Bluetooth Speaker
Product Diagram
The speaker features a circular design with several control elements and indicators:
- Top View:
- Voice Assistant Button
- Previous Track / Volume Up Button
- Bluetooth Button
- Microphone (?)
- Multi-function Button (MFB)
- Next Track / Volume Down Button
- Type-C Port (for charging)
- Halo LED Light (?)
A separate view shows the bottom of the speaker, highlighting the Halo LED Light.
Pairing
To pair the SoundPEATS Halo speaker with a Bluetooth device:
- Long press the Multi-Function Button (MFB) for 1.5 seconds to turn on the speaker. The indicator light will flash blue for 1 second, then enter pairing mode, flashing blue and green alternately.
- On your device (e.g., smartphone), activate Bluetooth and select "SOUNDPEATS Halo" from the list of available devices to establish a connection.
This process is visually represented by an arrow pointing from the speaker diagram to a smartphone screen displaying Bluetooth settings with "SOUNDPEATS Halo" shown as connected.
Reset
To reset the speaker to its factory settings:
- Connect the speaker to a power source using the Type-C charging cable. Ensure the speaker is in charging status.
- While the speaker is powered on, long press the Bluetooth Button for 10 seconds. The indicator light will flash green twice, confirming that the reset is complete.
This is illustrated by a diagram showing the Type-C cable connected to the speaker.
Stereo Mode
The SoundPEATS Halo supports stereo mode, allowing two speakers to be used together for an enhanced audio experience.
Enter Stereo Mode
To activate stereo mode:
- While the speaker is powered on, long press the Bluetooth Button for 3 seconds. The speaker will enter stereo mode, indicated by the light flashing blue quickly, and then enter pairing mode for 3 minutes.
Note: The speaker that initially pairs with the phone becomes the main unit. In stereo mode, only the main speaker can handle phone calls.
This is depicted by diagrams showing two speakers, with an instruction "Long Press for 3S" leading to a "Pairing Successfully" status connected to a phone.
Exit Stereo Mode
To exit stereo mode:
- Long press the Bluetooth Button for 3 seconds again. This action must be performed on the speaker you wish to exit stereo mode from.
After exiting stereo mode, the speaker will return to pairing mode. Note: After exiting stereo mode, only the main speaker can connect with the phone.
This is illustrated by diagrams showing two speakers with an indication of "(Exit stereo Mode)" for each, connected to a phone.
Button Control
The following table details the functions of the speaker's buttons:
| Function | Action |
|---|---|
| Power On | Long press the [MFB] for 1.5s |
| Power Off | Long press the [MFB] for 3s |
| Play/Pause | Press the [MFB] once |
| Volume Down | Press the ➖ once |
| Volume Up | Press the ➕ once |
| Previous Track | Long press ➕ for 1.5s |
| Next Track | Long press ➖ for 1.5s |
| Answer/Hang Up Phone Call | Press the [MFB] once |
| Switch Between Two Active Calls | Long press the [MFB] for 2s |
| Disconnect Bluetooth and Enter Pairing Mode Manually | Press the [Bluetooth Button] in the power-on status |
| Activate/Close Voice Assistant | Press the [Voice Assistant Button] once |
| Activate/Close Ambient Light | Long press [Voice Assistant Button] for 3s while the speaker is on |
Charge
To charge the SoundPEATS Halo speaker:
- Use a Type-C adapter with a current less than 1A to charge the speaker. The LED indicator will flash slowly in red during charging and will turn off when the speaker is fully charged.
- If the speaker is not in use for an extended period, it is recommended to charge it at least once every 3 months to maintain battery health.
The charging process is illustrated with a Type-C cable connecting to the speaker, alongside icons representing a [USB power source], a [power adapter], and a [computer/power bank] as potential power sources.
Q&A
Q1: How to enter stereo mode?
Stereo mode requires two speakers to be used simultaneously. For an enhanced music experience, it is recommended to purchase two SoundPEATS Halo speakers.
Q2: How long can the speaker play with a single charge?
The speaker can operate continuously for 8 hours on a single charge. If the speaker is not in use for a long time, please turn it off or deactivate your phone's Bluetooth. The speaker will automatically power off after 3 minutes of inactivity.
Q3: Why two speakers can not enter stereo pairing?
Please confirm that both speakers have successfully connected to a mobile device. If they have, clear the pairing records of the speakers from the mobile device. Ensure the two speakers are paired with each other. The LED of the main speaker will flash blue and green, while the second speaker's LED stays green. After these steps, activate Bluetooth on the mobile device and select "SOUNDPEATS Halo" from the Bluetooth list to pair.
