How to Enable WiFi on your 2nd Gen Pinnacle Dash Cam
- Make sure dash cam is not recording.
- Touch anywhere on the screen until you see the WiFi symbol on the bottom menu.
- Touch the WiFi signal to activate WiFi from your dash camera. Continue to the next step.
How to connect to WiFi enabled devices to your dash camera
- Search and install the TimaCam App in the App Store or Google Play Store.
- Next, open your Network WiFi Settings and select:
- NVT_CARDV... network or similar (your dash cam network name may be different than what is shown).
- Enter Password: 12345678
- Next, open the TimaCam app and the device will automatically connect to your dash camera. Make sure the dash cam and device connecting are near each other.
The TimaCam app is available for download on the App Store and Google Play.
The TimaCam app interface is shown, featuring an orange icon with a camera and WiFi symbol.
A visual representation shows a smartphone being held, with a WiFi symbol emanating from it, connecting to a dash camera. The dash camera is depicted from the front and side, highlighting its screen and controls.
The dash camera is shown with its brand name 'BRAND HDR WIDE ANGLE LENS' visible. It features a lens with a red ring and control buttons labeled 'M', up/down arrows, and a power symbol.
