PJ11 Clear Breathe Neo Smart Air Purifier

Product

Please read this manual carefully before using the product and keep it in a safe place.

Tips: The illustrations of the product, accessories, control panel, etc., in the manual are schematic diagrams for reference only. Due to product updates and upgrades, the actual product and the schematic may be slightly different; please prevail in kind.

Packing list: product body (including aromatherapy parts), power adapter, manual.

Touch Panel

The touch panel includes the following controls:

• Child Lock [lock symbol]
• PM2.5 Index display
• Sleep Mode [moon symbol]
• 2/4/8H Timer Button
• Fan Speed Switch Button [fan symbol]
• Temperature and humidity key [temperature/humidity symbol]

Usage

Connecting the Power Supply

Connect the power cord to the power connector of the main unit and turn on the power.

Tip: When using the purifier, it is recommended to close windows and doors for better purification.

Operation

The purifier is powered on and enters the self-test program. Indicator lights on the control panel flash three times and then go out, and the purifier enters the standby state.

Switch Button

Press the button to turn the air purifier on, indicated by a "drop" sound. Press again to turn it off; the power-off indicator is red after power-on. The default is 1st gear operation. Long press for 3 seconds to initiate networking.

Control Functions

Fan Speed Button

When the power is on, press the button briefly to cycle through gears 1, 2, 3, 4, and Auto. The corresponding digital display will show 1, 2, 3, 4, or A.

Child Lock Function

Press and hold the button for 3 seconds to turn on the child lock function. When active, the child lock light is red. Press the button again for 3 seconds to release the child lock; the light turns white. Press and hold the button for 3 seconds to turn the child lock light to white.

Sleep Mode

Tap to turn off all screen display lights for 10 seconds. Press any key to wake up the lights. Press the sleep button again or the function key to release the sleep state.

Temperature and Humidity Key

Tap to display temperature, then tap again to display humidity.

Night Light Sensor Function

During the day or when there are lights, the unit operates in ordinary mode. Lights turn off when ambient light is low, entering sleep mode.

Timer and Reset Function

The timer can be set from 1 to 12 hours, or Off. Multiple clicks cycle through 01H-12H-00H. The display returns to normal after 3 seconds of inactivity. When the filter life expires, the PM2.5 display shows a flashing red light. Long press the reset button for 5 seconds; the reset button light turns white upon successful reset.

Power Failure Memory Function

When power supply is restored after disconnection, the purifier automatically returns to the operating state before the power failure. However, time, child lock mode, and sleep mode are not memorized.

WIFI Distribution Network & APP

WIFI Distribution Network

Turn on your phone's Wi-Fi and Bluetooth. In standby mode, long press the power button for 3 seconds. The indicator light blinks red, indicating the machine is entering network status. The machine can be networked at this time. After successful networking, the indicator light will be white.

Note: If the machine does not operate the network for 2 consecutive minutes, it will exit the network mode.

Product Use APP Download

Download the "Pinnacle Intelligent" APP to experience more functions of the air purifier. Method: Open your phone's app store, search for "Pinnacle Intelligence", download, and install it.

Warm Tips:

• After installation, please follow the guidance of the mobile APP page to complete registration, login, and network allocation.
• Before starting, please make sure:
  • Your cell phone is connected to a Wi-Fi network.
  • Your router has enabled 2.4GHz band wireless signal.
  • The Wi-Fi indicator light on the unit is blinking.

Wi-Fi Status Light

Tip: If you encounter any problems during the Wi-Fi setup process, please refer to the "Troubleshooting > WI-FI Connection" section of this manual.

Filter Replacement and Basic Parameters

Replacement of Filter Cartridges

The ambient light color (blue, green, orange, red) changes according to the real-time air quality. The timer light is white when the filter element is in good condition, while red color means the filter element needs to be changed.

To change the filter cartridge: disconnect the power and place the air purifier on its upper part. Rotate the lower cover counterclockwise to remove the old cartridge and replace it with a new one. Turn the lower cover clockwise to lock it.

Reset Cartridge

After replacing the cartridge, long press the set button for 5 seconds under the power-on state. The cartridge reset light turns white, indicating the reset is completed successfully.

Basic Parameters

Hazardous Substances and Warranty

Names and Contents of Hazardous Substances in Products

This table is prepared in accordance with the provisions of SJ/11364. 'O' indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit requirement stipulated in GB/T26572. 'X' indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit requirement specified in GB/T26572.

Warranty Description

Desktop air purifier product after-sales service is strictly based on the implementation of after-sales three packages of services. Services are as follows:

Warranty Policy

1. Within 7 days from the next day after you sign for the product, if the product has a performance failure listed in the "Product Performance Failure Table", the after-sales service center can provide a return or exchange service free of charge.
2. Within 8-30 days from the next day after you sign for the product, if the product has a performance failure listed in the "Product Performance Failure Table", the after-sales service center will determine eligibility for a free return or exchange service.
3. Within 12 months from the next day after you sign for the product, if the product has any of the performance failures listed in the Product Performance Failure Table, you can enjoy the exchange or repair service free of charge, as determined by the after-sales service center.

Non-Warranty Regulations and Troubleshooting

Non-Warranty Regulations

Warranty is void under the following conditions:

1. Unauthorized servicing, misuse, collision, neglect, abuse, fluid ingestion, accidents, alterations, improper use of non-product parts, or removal or alteration of labels or tamper-evident markings.
2. Exceeding the validity period of the three guarantees.
3. Damage caused by force majeure.
4. Failure to comply with the performance failures listed in the Product Performance Failure Table.
5. Product and accessory failures caused by human reasons as listed in the Product Performance Failure Table.

Tip: Because of the need to ensure the safety of product transportation, it is recommended to keep the packing box for at least 30 days from the date of signing the receipt.

Product Performance Troubleshooting

Warranty

Caveats and Safety Precautions

Restrictions on Use

Do not use the unit under the following conditions, as electric shock, fire, and other damages may occur:

• Keep the main unit, especially the air inlet holes, away from open flame appliances such as candlesticks, incense burners, stoves, fireplaces, cigarettes, firecrackers, lighters, electronic ignition guns, igniters, and fire pits.
• Keep the host away from high-temperature heating appliances such as electric heaters, heaters, foot warmers, electric stoves, and electric irons, and avoid combustible materials.
• Avoid combustible materials from entering the main unit.
• Do not place on unstable surfaces or in places that are hot, humid, or exposed to water, such as bathrooms.
• This product is not intended for use by users (including children) with inadequate physical, sensory, mental ability, experience, or knowledge, unless they are under the supervision or instruction of a responsible person.
• Keep away from children and avoid children playing with the appliance.

Handling and Maintenance

• When moving, be sure to stop the main unit and unplug it from the power supply.
• If the air inlet grille on the lower cover of the filter cartridge is not installed correctly, the unit will not start.
• The air inlet hole of the main unit should be at least 10cm away from the wall or other obstacles.
• Clean the filter mesh frequently by sweeping dust, hair, and impurities to help minimize the growth of bacteria.
• When not in use for a long time, please cover the air outlet on the top of the purifier to prevent dust from falling into the top grille and keep it clean.

Power Supply Precautions

• Use the power cord and outlet according to the following instructions to avoid fire, electric shock, or damage.
• Do not pull, twist, or bend the power cord excessively, as this may cause the core to be exposed or broken.
• A power outlet with a suitable power plug must be connected.
• Be sure to use the power adapter that comes with the main unit; do not use other brands of power adapters.
• Before performing maintenance, disconnect the power supply.
• If the power cord is damaged, it must be replaced with a special cord or a special kit available from the manufacturer or service department.

During Use Precautions

• If the product experiences abnormalities such as unusual noise, odor, high temperature, or irregular fan rotation, stop using it immediately.
• Do not put fingers or foreign objects into the protective parts, removable parts, air inlet holes, and air outlet.
• Do not sit, lean, or tilt the main unit.
• When used together with household gas appliances (e.g., gas cooker, gas water heater, etc.), please ventilate the air to avoid carbon monoxide poisoning.
• Do not pour liquids or throw powders and fine substances into the interior of the main unit from the air outlet.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.