VIBE British Audio

BlackDeath Comp HEX

Models: BLACKDEATHC12HEX-V7, BLACKDEATHC15HEX-V7, BLACKDEATHC18HEX-V7

SPL Subwoofers

Owners Manual

Congratulations on purchasing your VIBE subwoofer. Please read this manual in order to fully understand how to get the best results from this product and ensure that all advice on how to look after the product is followed.

Thank you for buying VIBE, we hope you enjoy listening to your product as much as we enjoyed creating it.

Caution

Limited Warranty

All VIBE products carry a full 12 month warranty, valid from the date of the original receipt and proof of purchase (UK only). The online warranty card should be completed within seven days of the original purchase date. The original receipt and packaging should be retained for this twelve month period. If the product develops a problem at any stage during the warranty period, it should be returned to the point of purchase in its original packaging, and complete with no items missing.

A full description of VIBE's warranty information can be found on our website: www.vibeaudio.co.uk

What Is Not Covered

International Warranty

Contact your international VIBE dealer or distributor concerning specific procedure for your country's warranty policies. www.vibeaudio.co.uk

Warning

VIBE equipment is capable of sound pressure levels that can cause permanent damage to your hearing and those around you. Please use common sense when listening to your audio system and practice safe sound.

Wiring Connections

Please follow the wiring diagram below and ensure that correct polarity is observed as incorrect wiring may cause the subwoofer to be out of phase with the rest of the system and result in a loss of bass.

Series 2Ω Impedance

[Diagram description: Two subwoofers wired in series for a 2Ω impedance. Positive terminals are connected together, and negative terminals are connected together, with the overall connection points marked with '+' and '-'.]

Parallel 0.5Ω Impedance

[Diagram description: Two subwoofers wired in parallel for a 0.5Ω impedance. Positive terminals are connected to positive, and negative terminals are connected to negative, with the overall connection points marked with '+' and '-'.]

Run In Procedure

VIBE recommends that you follow the run in procedure for the subwoofer detailed below.

When your subwoofer is used for the first time, like most brand new items it is naturally very stiff and rigid. It will take time for the moving parts of this subwoofer to loosen up before the subwoofer will be ready to deliver its full potential.

For the first thirty hours it is recommended that you play the subwoofer at low to medium volumes, gradually increasing the volume level as time progresses. As a guide, if you listen to your subwoofer for one hour every day it will take a month for the subwoofer to run in properly.

You will notice a big change in the sound of the subwoofer over this period. As the spider and surround begin to run in, the sound will get deeper and harder, also the output of the subwoofer will increase as the suspension loosens up.

The subwoofer is like your car's engine, it needs a few thousand miles before you can drive it to its full potential. Driving it into the redline from the first day will mean engine damage is certain and will not be covered by warranty.

Failure to follow this simple procedure is the most common reason for a subwoofer to fail after a very short period of time.

TS Parameters

Parameter BLACKDEATHC12HEX-V7 BLACKDEATHC15HEX-V7 BLACKDEATHC18HEX-V7
Fs 32.2Hz 28.35 Hz 25.71Hz
Vas 22.09L 43.33L 122.7L
Re 1.Ω 1.8Ω 1.8Ω
Qms 6.04 5.43 5.09
Qes 0.34 0.26 0.34
Qts 0.323 0.256 0.32
BL 20.14Tm 27.67 Tm 23.65Tm
SPL 85.36dB 87.67dB 89.88dB
Sd 0.047 m/2 0.075 m/2 0.116m/2
Cms 0.0712 mm/N 0.054 mm/N 0.64mm/N
Mms 342.8g 578.3g 590.8g
Rms 11.48m 9.30m 18.730m
Res 35.34 40.4 29.86
RP 37.34 42.4 31.86
Nref 0.2% 0.35% 0.58%

Specifications

BLACKDEATHC12HEX-V7

Model BLACKDEATHC12HEX-V7
Mounting Diameter 11.1" (283mm)
RMS Power 5000 watts
Peak Power 15,000 watts
Minimum Input (RMS) 2500 watts
Frequency Response 15Hz - 850Hz
Impedance Dual 1Ω
Recommended Enclosure 3 - ∞ft³ Vented
Recommended Amplifier BLACKDEATHM8K-V6

BLACKDEATHC15HEX-V7

Model BLACKDEATHC15HEX-V7
Mounting Diameter 14.1" (359mm)
RMS Power 5000 watts
Peak Power 15,000 watts
Minimum Input (RMS) 2500 watts
Frequency Response 15Hz - 850Hz
Impedance Dual 1Ω
Recommended Enclosure 3 - ∞ft³ Vented
Recommended Amplifier BLACKDEATHM8K-V6

BLACKDEATHC18HEX-V7

Model BLACKDEATHC18HEX-V7
Mounting Diameter 16.8" (425mm)
RMS Power 5000 watts
Peak Power 15,000 watts
Minimum Input (RMS) 2500 watts
Frequency Response 15Hz - 850Hz
Impedance Dual 1Ω
Recommended Enclosure 3 - ∞ft³ Vented
Recommended Amplifier BLACKDEATHM8K-V6

Technical Enquiries

UK Technical Enquiries

Call 09067031420

Calls cost 50p per minute. Call costs correct 01/02/12

Hours of business 9.00am - 5.30pm GMT Monday - Friday.

All calls are recorded for training purposes.

MIDBASS Distribution
PO Box 11000
B75 7WG

[Stylized map of the United Kingdom.]

International Technical Enquiries

For international technical support please contact the distribution agent for your country.

Please visit www.vibeaudio.co.uk for more details

[Stylized world map.]

Designed and engineered in England

[Website]: www.vibeaudio.co.uk

[YouTube]: www.youtube.com/vibeaudio

[Facebook]: www.facebook.com/vibeaudio

[Twitter]: www.twitter.com/vibecaraudio

PDF preview unavailable. Download the PDF instead.

Blackdeath-comp-subwoofer-manual-050718 Adobe InDesign CC 13.1 (Macintosh) Adobe PDF Library 15.0

Related Documents

Preview VIBE BlackAir Subwoofer Owners Manual and Specifications
Owners manual, warranty information, specifications, and technical parameters for VIBE BlackAir subwoofers, including models BLACKAIR10D2-V7, BLACKAIR12D2-V7, and BLACKAIR15D2-V7. Features installation guidance, run-in procedures, safety warnings, and contact information for VIBE audio products.
Preview VIBE PULSE Series Subwoofers User Manual
User manual for VIBE PULSE10-V0 and PULSE12-V0 component subwoofers, covering owners manual, caution, limited warranty, wiring connections, run-in procedure, specifications, and technical support contact information.
Preview VIBE BDC15D1SPL-V4 & BDC18D1SPL-V4 Component Subwoofer User Manual
User manual for VIBE BDC15D1SPL-V4 and BDC18D1SPL-V4 component subwoofers, covering specifications, installation, run-in procedures, and warranty information.
Preview VIBE BlackBox Amplifiers: Owner's Manual, Specifications, and Accessories Guide
A comprehensive guide to VIBE BlackBox car audio amplifiers, including the Stereo 2, Stereo 4, and Bass 1 models. This document covers installation, setup, troubleshooting, technical specifications, and a range of VIBE audio accessories and system kits.
Preview VIBE Black Death Subwoofer: Instruction Manual, Installation Guide, and Specifications
Comprehensive guide for VIBE Black Death subwoofers, covering installation, run-in procedures, wiring options, technical specifications, accessories, and warranty information. Includes detailed diagrams and product parameters for models like BD154P, BD154C, BD151C, BD15CR-V1, and BD15PR-V1.
Preview VIBE Space 12 D2/D4 Subwoofer Owner's Manual & Installation Guide
Comprehensive owner's manual and installation guide for the VIBE Space 12 D2 and D4 subwoofers, covering setup, wiring, enclosure design, warranty, and specifications. Includes accessory information.
Preview VIBE BlackAir6C-V0 Component Speaker User Manual
Comprehensive user manual for the VIBE BlackAir6C-V0 component speaker system. Includes installation guides, technical specifications, warranty information, and safety precautions for optimal audio performance.
Preview VIBE BlackBox Amplifiers: Stereo 2, Stereo 4, Bass 1 - User Manual & Specifications
Comprehensive user manual and technical specifications for VIBE BlackBox car amplifiers, including Stereo 2, Stereo 4, and Bass 1 models. Learn about installation, setup, troubleshooting, product features, and accessories from VIBE.