LuxPro LP366 LED Handheld Worklight

Product Overview

The LuxPro LP366 is an LED handheld worklight designed for versatile use. It features a rugged design, BROADBEAM area light, LED flashlight, dual molded rubber design, a 360° swivel hook, and a magnetic base.

Key Features:

• Rugged design
• BROADBEAM area light, LED flashlight
• Dual molded rubber design
• 360° swivel hook
• Magnetic base
• Adjustable position stand
• IPX4 waterproof rating
• Batteries included (3 AA)

Operation Instructions

On/Off: Press and release the yellow button on the front of the work light to turn it on and off.

Cycle Modes: Press and release the button repeatedly to cycle through modes: Flashlight High, Area High, and Area Low.

Battery Replacement

The LP366 uses 3 AA batteries. To replace the batteries:

1. Locate the battery access door on the back of the work light (opposite the on/off button).
2. Gently push in the tab on the door and lift to remove it.
3. Remove existing batteries and insert new batteries according to the (+/-) symbols in the tubes. For best results, use brand new alkaline batteries of the same voltage and brand.
4. Re-attach the access door by inserting the side with small tabs first, then push down gently until the door clicks into place.

If the work light will not be used for an extended period, it is recommended to remove the batteries and store them in a dry, protected place.

Specifications

ANSI/PLATO FL1 STANDARD

Product Warranty

The LP366 comes with a Limited 30-Day Warranty Against Manufacturer's Defects from the time of purchase. For warranty claims, please contact LuxPro by calling 801-553-8886 or sending an email to info@simpleproducts.com.