Door Handle Wood/Stainless Steel
564-B
Installation Instructions
Version 04/22
This document provides installation instructions for the Sentiotec 564-B door handle, constructed from wood and stainless steel.
Key Features:
- Material: Wood and Stainless Steel
- Model: 564-B
- Hole Spacing: 200 mm
Mounting Guidance
The following diagrams illustrate the mounting process and required dimensions.
Outside View
The outside of the door requires two mounting holes. The diameter of these holes is indicated as Ø 30 mm. The overall height of the handle assembly is approximately 300 mm.
Inside View
The inside of the door also requires corresponding mounting holes. The internal mounting components are secured through these holes. The height of the internal section of the handle is approximately 225 mm.
Dimensions:
- Hole Diameter: 30 mm
- Hole Spacing: 200 mm
- Overall Handle Height: 300 mm
- Internal Handle Height: 225 mm
Manufacturer
sentiotec GmbH
Division of Harvia Group
Wartenburger Straße 31, A-4840 Vöcklabruck
Contact:
Phone: +43 (0) 7672/22 900-50
Fax: -80
Email: info@sentiotec.com
Website: www.sentiotec.com
sentiotec
