Wanbo Projector - Introduction Manual

Packing List

The packing list typically includes:

• Projector
• Remote Control
• Adapter
• Cable

Note: Some accessories may differ based on the model.

Product Brief

The projector features a lens, focus wheel, air outlet, indicator light, power input, headphone jack, and USB interface. It utilizes LCD technology with an LED light source.

Basic Parameters:

Product Considerations

• Avoid looking directly into the lens to prevent eye injury.
• Do not use in hot and humid environments.
• Do not block the air outlet or air inlet.
• Install at least 30cm away from the wall for proper performance.
• Warning: Do not block vents. Do not wipe with harsh cleaners. Use only in environments with temperatures between 5-40℃ and humidity below 80% (non-condensing). Avoid dusty areas, strong magnetic fields, and direct sunlight. Suitable for non-tropical climates.
• Note: Do not disassemble, squeeze, or impact the projector. Avoid flammable or explosive environments. The manufacturer is not responsible for damage caused by human factors.

Projection Size / Distance

This table outlines projection sizes and corresponding distances:

Instructions

Powering On:

1. Press the power button on the top of the projector.
2. Point the remote control at the projector and press the power button.

Powering Off:

Short press the power button on the machine or remote. When the shutdown prompt appears, short press the power button again.

Remote Control Functions:

• Multi-Function Keys
• Arrow keys
• OK button
• Home button
• Volume +
• Volume -
• Return button
• Power button

Focusing Method: Manual Focus

General Fault Description

Indicator Status

Poisonous and Harmful Substance, Element Name and Content

This table indicates the presence of hazardous substances in the product's components:

Legend:

• ○: Content of hazardous substance is below the limit specified by SJ/T11363-2006.
• X: Content of hazardous substance exceeds the limit. Components marked 'X' have no substitute due to technological limitations.

Note: The number in the logo represents the normal environmental service life of the product (excluding batteries).

Product Warranty Description

Wanbo provides a one-year warranty for non-artificial damage from the date of purchase, subject to the "Consumer Rights Protection Law" and "Product Quality Law" of the People's Republic of China.

Warranty Service Includes:

• Warranty service for defaults caused by product technical reasons during the warranty period.
• Free maintenance for defects caused by product quality issues within 12 months, with valid purchase proof.

Situations Not Covered by Warranty:

• Accessories separate from the mainframe.
• Unauthorized disassembly or repair.
• Damage caused by external forces or natural disasters.
• Machine casing, user manual, packaging, promotional items, and gifts.
• Damage from self-disassembly, unauthorized maintenance, or modification.
• Damage caused by artificial factors.
• Expired warranty period.

Warranty Card

Please fill out the warranty card and contact your distributor for quality issues.

Warranty Time: 1 year

Customer Information:

• Customer Name: __________
• Customer ID: __________
• Purchase of Shop: __________
• Customer Tel: __________

Fault Description: (Please describe in detail for quick maintenance)

_______________________________________________________________________

_______________________________________________________________________

_______________________________________________________________________

Service Center:

• Distributor 1: __________
• Distributor 2: __________
• Distributor 3: __________

Certificate: QC: 05

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Contact Information

Shenzhen Wanbo Technology Co., Ltd.

E-mail: szwanbo@szwanbo.net

Product Specifications Summary

The color, appearance, and specifications of this product are subject to the actual product and may change without notice due to performance improvement.

Manufacturing Information

Material: 128g coated paper, white

5-page accordion fold, double-sided printing

Unfolded size: 450*120mm Folded size: 90*120mm