Wanbo T2 Max 1080P Mini LED Projector
Instruction Manual
Introduction
Before using this product, please read this product manual carefully.
Thank you for purchasing our products. For your safety and benefit, please read this product manual carefully before using the product. If you fail to follow the product instructions or precautions, and cause any personal injury, property or other losses, the company will not bear any responsibility.
Packing List
- ? Projector
- ?️ Remote Control
- ? Adapter
- ? Cable
Note: Some accessories are different due to different models.
Product Brief
Detailed view of the projector and its components:
- Front/Top View: Features a lens with a focus wheel, an air outlet, and an OFF/ON button.
- Back View: Includes a horn, power input, indicator light, headphone jack, USB interface, and HD port.
- Bottom View: Features an inlet.
Remote Control
The remote control allows for operation of the projector. Key buttons include:
- OFF/ON: Powers the device on or off.
- Multi-Function Keys: Various functions depending on context.
- Arrow Keys: Navigate menus.
- OK: Selects an option.
- Previous/Next: Navigate content.
- Volume +/-: Adjust audio volume.
- Return: Go back to the previous screen.
- Home: Return to the main menu.
- Signal Source (Multimedia) / Mouse Mode (Android): Switch input sources or activate mouse mode.
Basic Parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Display Technology | LCD | Type of Light Source | LED |
| Product Type | Desktop | Size | 110*140*150mm |
| Keystone Correction | ±40° | Focusing Method | Manual Focus |
| Weight | 0.9KG | Throw Ratio | 1.35:1 |
Instructions
Turning the Projector ON
Method 1: Press the power button on the top of the projector.
Method 2: Point the remote control at the projector and press the power button on the remote control.
Turning the Projector OFF
Short press the power button of the machine or the power button on the remote control. After the shutdown prompt box appears, short press the power button of the machine or the power button on the remote control again to confirm shutdown.
General Fault Description
| Faults | Solution |
|---|---|
| No display | Shut down and reboot. |
| Android system crash | Shut down and reboot. |
| Abnormal display | Shut down and reboot. |
| Overheat indication or shut-down automatically | Please do not block the front air outlet and rear air inlet mesh, then restart. |
Indicator Status
| Status | Color | State |
|---|---|---|
| Working state | Red ? | Green ? |
| Standby | ON | OFF |
| Starting up | OFF | ON |
| Working temperature alarm | Slow flash | OFF |
Product Considerations
- When using the projector, please avoid looking directly into the lens to prevent eye strain. ?️
- Please do not use in hot and humid environments. ?️?
- Please do not block the air outlet or air inlet. ?
- Install away from the wall. To maintain proper performance and feasibility, please leave at least 30cm between the projector and the wall. ?
Warning:
- Don't block the projector's vented slits and openings.
- Don't wipe the device with a scrub, paraffin, or solvent.
- Used under the following conditions:
- Extremely hot, cold, or humid environments are not permitted.
- Ensure indoor temperature is between 5-40°C.
- Relative humidity is 80% maximum at 5-40°C, with no condensation.
- Areas susceptible to large amounts of dust and dirt are not permitted.
- Near any equipment that produces a strong magnetic field is not permitted.
- Sunlight exposure directly is not permitted.
- The product is suitable for non-tropical climates. ?
Note: Without the consent of the manufacturer, the user should not disassemble, squeeze, or impact the projector, and avoid using it under high temperature, high pressure, flammable, or explosive environments. The manufacturer does not take any responsibility for damage to the projector caused by human reasons.
Projection Size / Distance
This table shows the relationship between projection size, screen dimensions, and lens-to-screen distance without keystone correction.
| Projection Size (inch) | Screen Length*Width (m) | Lens — Screen (m) |
|---|---|---|
| 30 | 0.7*0.4 | 0.94 |
| 40 | 0.91*0.51 | 1.23 |
| 50 | 1.13*0.64 | 1.51 |
| 60 | 1.36*0.77 | 1.80 |
| 70 | 1.57*0.88 | 2.06 |
| 80 | 1.78*1.0 | 2.33 |
| 90 | 2.0*1.12 | 2.61 |
| 100 | 2.20*1.24 | 2.84 |
The color, appearance, and specifications of this product are subject to the actual product and may change without notice due to performance improvement.
Poisonous and Harmful Substance, Element Name and Content
This table indicates the presence of hazardous substances in the product's components.
| Part name | Hazardous substances | |||||
|---|---|---|---|---|---|---|
| Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr⁶⁺) | Polybrominated Biphenyls (PBBs) | Polybrominated Diphenyl Ethers (PBDEs) | |
| Shell | ○ | ○ | ○ | ○ | ○ | ○ |
| Optical Machine | ○ | ○ | ○ | ○ | ○ | ○ |
| Circuit Board | ○ | ○ | ○ | ○ | ○ | ○ |
| Fan | ○ | ○ | ○ | ○ | ○ | ○ |
| Other Wires | × | ○ | ○ | ○ | ○ | ○ |
| Remote Control | ○ | ○ | ○ | ○ | ○ | ○ |
| Power Supply | ○ | ○ | ○ | ○ | ○ | ○ |
Legend:
- ○: Content of the hazardous substance in all homogeneous materials of the component is under the limits of SJ/T11363-2006.
- ×: Content of the hazardous substance exceeds the limit requirements specified by SJ1T11363-2006 in at least one homogeneous material of the component. The components labeled "X" have no substitutive due to global technology development limits.
Circuit board assembly includes printed circuit board and its components, electronic components, etc.
⏳ The number in the logo represents the normal environmental service life of the product (Battery Excluded).
Product Warranty Description
The after-sale service of this projector is strictly based on the "Consumer Rights Protection Law of the People's Republic of China" and "Product Quality Law of the People's Republic of China". Service content is detailed as below:
Within 12 months upon purchasing, faults not caused by improper use of human factors shall be inspected by the after-sale service center. Free maintenance service shall be provided if it's determined as a defect caused by product quality itself, with valid purchase proof.
Non Warranty Regulations:
- Machine Casing, User Manual, Packaging, Promotional Items, and random gifts are out of the warranty range.
- Damage caused by self-disassembly or unauthorized maintenance, modification, etc.
- Damage caused by artificial damage.
- Period of warranty validity has expired.
Warranty Time:
1 year
Certifications: CE, RoHS, ♻️, ✅
Warranty Card
1. Wanbo offers "three guarantees" for this product, including a one-year warranty for non-artificial damage since purchasing (subject to purchase record).
2. Warranty service will be provided for any default caused by product technical reasons during the warranty period.
3. Following situations are out of the range of guarantee:
- Accessories out of the mainframe.
- Unauthorized disassembly and repair without consent.
- Damage caused by external force and other natural disasters.
4. Please fill this card and contact your distributor when products have quality problems.
5. This warranty is limited to product maintenance during the warranty period, with no other liability.
After-Sale Service Card
Customer Name: _________________________________
Purchase of Shop: _________________________________
Customer ID: _________________________________
Customer Tel: _________________________________
Fault Description (Please describe in detail for quick maintenance): _____________________________________________________
(Certificate QC: 05)
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Contact Information:
Shenzhen Wanbo Technology Co.Ltd
E-mail: szwanbo@szwanbo.net
Documents / Resources
You can find the official instruction manual in PDF format:
Associated model numbers: T2MAX, 2A7PIT2MAX, T2 Max.
