Bosch Dishwasher Water Inlet Hose Extension Installation Guide

Assembly Instructions for Water Inlet Extension

This guide provides instructions for installing a water inlet hose extension for Bosch dishwashers. It covers procedures for appliances both with and without the Aqua-Stop safety feature.

Safety Precaution: Power Disconnection

[arrow] [power symbol] Before proceeding with installation or removal, always disconnect the appliance from the power supply.

Kit Components and Specifications

The water inlet hose extension kit includes:

• Water inlet hose extension (2200 mm length)
• Connectors
• Sealing rings

The total assembled length with connectors is approximately 1950 mm.

Installation Procedure (Without Aqua-Stop)

For appliances not equipped with an Aqua-Stop safety device:

1. Connect the hose extension to the appliance's water inlet port.
2. Connect the other end of the hose extension to the water supply tap.
3. Tighten all connections securely. Ensure the torque does not exceed 10 Nm.
4. Maintain a minimum clearance of 10 mm to prevent sharp bends in the hose.

[warning symbol] Avoid creating sharp bends in the hose.

Installation Procedure (With Aqua-Stop)

For appliances equipped with an Aqua-Stop safety device:

1. Connect the hose extension to the Aqua-Stop device.
2. Connect the Aqua-Stop device to the appliance's water inlet port.
3. Connect the other end of the hose extension to the water supply tap.
4. Tighten all connections securely. Ensure the torque does not exceed 10 Nm.
5. Maintain a minimum clearance of 10 mm to prevent sharp bends in the hose.

[warning symbol] Avoid creating sharp bends in the hose.

General Information

Always consult the specific documentation for your Bosch dishwasher model for detailed instructions.

Document Reference: 9001 996 634 (0502)