SEECODE Car Cup Cooler / Heater

Information on Environmental Protection

The packaging materials used are recyclable. Please dispose of them according to local regulations. This product must not be disposed of with normal household waste within the European Union. Dispose of the device via communal collecting points.

Guarantee and Warranty

The product has been checked for quality and functionality before dispatch. A 12-month warranty is provided from the date of purchase. Defective products will be replaced or repaired free of charge during the warranty period. The warranty is not extended by repairs or exchanges. Exchanged parts become the property of the manufacturer. Contact the manufacturer before sending a unit for warranty service.

The warranty is excluded in cases of:

• Faulty installation
• System modifications without manufacturer approval
• Damage due to moisture, drops, or damaged cables
• Lack of proof of purchase

Declaration of Conformity

The CE declaration of conformity can be downloaded from the manufacturer's website: www.seecode.de or www.mobiset.de.

Symbols Used

WARNING: Indicates a potentially dangerous situation that could lead to serious injury or death. Follow the instructions provided to avoid danger. Notes provide additional helpful information.

Intended Use and Warnings

This device is intended exclusively for cooling and heating beverages. Any other use is considered non-conforming and may be dangerous. Always use the device as intended and follow the procedures described in this manual. Claims for damages resulting from non-conforming use are excluded; the risk is borne by the operator.

Limitation of Liability

Technical information is current at the time of printing. No claims can be derived from the data, illustrations, or descriptions. The manufacturer is not liable for damages due to non-compliance with instructions, non-intended use, improper repairs, unauthorized modifications, or use of unauthorized spare parts.

Basic Safety Information

• Check the device for visible external damage before use. Do not operate a damaged or dropped device.
• Persons with reduced physical, mental, or motor skills should only use the device under supervision or instruction by a responsible person.
• Children are only allowed to use the device under supervision.
• Repairs must only be carried out by authorized specialized companies or customer service. Improper repairs can lead to significant dangers and void the warranty.
• Protect the device from moisture and liquid penetration.
• Avoid direct sun radiation.

Installation Site Requirements

For safe and faultless operation, the installation site must meet the following requirements:

• Place the device on a firm, flat, and horizontal base (e.g., a car's cup holder).
• Do not place the device in a hot, wet, or very humid environment, or near flammable materials.

Unpacking and Delivery Check

• Remove the device and manual from the carton.
• Before first use, remove all packaging materials and protective films from the device.
• Store the original packaging during the warranty period for potential returns. Transport damage will void warranty rights.
• Check the contents for completeness and visible damage. Immediately report any incomplete or damaged deliveries to your supplier.

Product Overview

The device features a top ring with indicators for warming and cooling, and an LED ring. The bottom has a 12V power connector and air/ventilation inlets, with an internal fan.

• Top View: Shows controls for "Warming" and "Cooling" with an LED Ring.
• Bottom View: Shows the 12V connector and air inlets for the fan.
• Side View: Depicts the cylindrical body with a ribbed texture.

Accessories

• 1 x Charging cable for the cigarette lighter socket
• 1 x Instruction Manual

Technical Specifications

• Connector: 12V / 3A
• Power: 36W
• Measurements: 105 x 105 x 183 mm (Length x Width x Height)
• Outer Diameter (top): 97.3 mm
• Outer Diameter (bottom): 74.9 mm
• Inner Diameter: 68.3 mm
• Weight: 473 g

Operating Instructions

1. Plug the charging cable into the SEECODE Cup Cooler Heater and connect the other end to your car's 12V cigarette lighter socket or a similar connector.
2. Select one of the following modes:
   • Cooling: Press the cooling function button. The button will light up light blue. [❄️]
   • Heating: Press the heating function button. The button will light up light red. [?]
3. To switch off the device, click the respective mode button again.

Notes:

• For best results, use bottles, cans, or cups that fit perfectly in the holder.
• For regular beverages, the average cooling and heating time is approximately 30 minutes or more.

Manufacturer Information

Mobiset GmbH – Rösrather Straße 333 – 51107 Köln

Tel.: +49 22 19 89 52 0 – Fax: +49 22 19 89 52 39