Westinghouse
Gas Grill Oven
Model: WVG655SC
Dimension and Installation Guide
This document provides essential dimensions and installation guidance for the Westinghouse Gas Grill Oven, Model WVG655SC.
Product and Installation Dimensions
The following diagram illustrates the physical dimensions of the product and the required cut-out space for installation. All measurements are in millimeters (mm).
The diagram displays a three-dimensional view of the Westinghouse Gas Grill Oven and its intended installation cavity. The oven unit is shown with its front face and side profile. Key dimensions are indicated: The overall product width is 596 mm, height is 725 mm, and depth is 573 mm. The required flush mount cut-out dimensions for the cabinet are: Width: 600 mm Height: 731 mm Depth: 581 mm A specific note highlights a ventilation requirement: a gap of 20 mm is needed at the bottom rear of the cabinet. This gap can be a full-width opening, 20 mm deep, to ensure proper air circulation.
| Product Specification | Dimensions (WxHxD mm) |
|---|---|
| Product WxHxD (mm) | 596 x 725 x 573 |
| Flush mount cut-out WxHxD (mm) | 600 x 731 x 581 |
Important Information
Please note that these dimensions are provided as a guide only. All measurements are in millimeters (mm). For comprehensive and detailed installation instructions, it is recommended to refer to the official product manual provided with the appliance.
