Jøtul F 620 Heat Shield Side Installation Guide
Step 1: Component Overview
The illustration displays the Jøtul F 620 stove body with its door open, alongside several red-colored heat shield components. These components include side panels, a top panel, and a base piece, shown separately for assembly.
Step 2: Bracket Attachment
This step shows the attachment of a small red bracket to the interior side wall of the stove. A magnified inset view clearly depicts the bracket being secured using a red pin or screw into a designated hole.
Step 3: Positioning Side Heat Shield
The main red side heat shield panel is presented for installation against the interior side wall of the stove. The diagram indicates the correct orientation and alignment for attachment.
Step 4: Inserting Side Heat Shield
The side heat shield panel is shown being inserted into its position within the stove body. An arrow clearly illustrates the direction of insertion. Text '620 / 520' and '10062008' are visible on the panel.
Step 5: Securing Side Heat Shield
With the side heat shield panel in place, red clips or brackets are being attached to the interior bottom of the stove to secure it. A magnified inset provides a close-up view of the clip and red pin/screw mechanism.
Step 6: Placing Top Heat Shield
The red-colored top heat shield panel is depicted being placed inside the stove. An arrow indicates its placement, suggesting it rests on internal supports or ledges.
Step 7: Placing Bottom Heat Shield
The red-colored bottom heat shield panel is shown being positioned inside the stove, designed to cover the base area.
Step 8: Manipulating Door Component
The stove door is shown open. A red heat shield component, possibly related to the side or bottom, is being manipulated. An arrow suggests a sliding or pulling motion for its placement or removal.
Step 9: Positioning U-shaped Heat Shield
A red, U-shaped heat shield component is shown being placed onto the interior base of the stove. An arrow indicates its specific position.
Step 10: U-shaped Heat Shield in Place
The interior base of the stove is illustrated with the U-shaped heat shield component correctly positioned.
Step 11: Product Information Label
The rear exterior of the Jøtul F 620 stove is displayed, featuring a prominent product information label. This label includes:
Product: Jøtul F 620 F, FR, FL, Heatshield back, Convection kit
Type: Room heater fired by solid fuel
Standard: EN 13240-2001/AC:2003/A2:2004
CE Marking
DoP: F620kit-CPR-300822
Technical Specifications:
Emission of CO in combustion products (13% O₂): 0.07%
Flue gas temperature: 272°C
Nominal heat output: 8.5 KW
Efficiency: 77%
Fuel type: Wood
Operation type: Intermittent
Electrical safety: Not applicable
Note: The appliance can be used in a shared flue.
Distances to combustible materials:
SIDE WITH GLASS: 600 mm
SIDE WITH CAST IRON: 400 mm
SIDE WITH CAST IRON + HEATSHIELD: 300 mm
REAR: 300 mm
REAR WITH HEATSHIELD: 100 mm
FLOOR: See manual
Country | Classification | Standard | Approved by |
---|---|---|---|
EUR | Intermittent | EN 13240 | Danish Technological Institute |
Multilingual Instructions:
English: Follow user's instructions. Use only recommended fuels.
German: Montage- und Bedienungsanleitung beachten. Verwenden Sie nur ur empfohlenen Brennstoffen.
French: Respectez les consignes d'utilisation. Utilisez uniquement les combustibles recommandés.
Instruction: 'Cut off this part and replace the label already attached to the product with this one.' [scissors icon]
Cat.no. 10064535-P00
Manufacturer: Jøtul AS, November. 2022
Jøtul AS,
P.o. box 1411
N-1602 Fredrikstad,
Norway
Cat.no. 10064535-P00
Jøtul AS, November. 2022