USB Rechargeable Mosquito Swatter

Safety & Warnings

• ⚠️ Caution!
• ? Hot Surface! Do not touch the metal mesh surface when in operation.
• Do not touch metal mesh surface with metal objects when in operation.
• This device runs at a high voltage of 3200V and may be dangerous to touch.
• Do not operate this device in the vicinity of flammable gas or combustible dust.
• Do not touch the device if it is in water or use this device around water.
• Do not submerge in water. For cleaning instructions, refer to the Cleaning & Care section of this user guide.
• Do not rinse with water or wipe with a wet towel.
• This is not a toy. Keep this device away from children at all times.
• This product is for indoor, domestic use only. It is not suitable for barns, farms, livestock sheds, or similar environments.
• This device may retain residual electric current even after it is turned off. Be careful to not touch the metal mesh surface even after use.
• To avoid damage, do not swat at or near anything but the insects intended for this device. Swatting at hard surfaces or objects may result in damage to the device.
• The LED light bulbs on this device are non-replaceable. Do not attempt to repair or service this device yourself.
• The lithium battery can only be replaced by the supplier or an authorised repair agent. Do not attempt to repair or replace the battery yourself.
• Only use with a charging adapter to the same rating as specified in this user guide (5V DC, 300mA). Using another adapter may damage the device, or provide insufficient power.
• Do not leave the device on charge for longer than 12 hours.
• Do not operate the device while it is charging.

Overview

The Kogan USB Rechargeable Mosquito Swatter features the following components:

• Electric net surface
• LED light
• Power indicator
• Charging indicator
• Charging base
• Power switch (with positions for 'On + LED light', 'Power on', and 'Power off')
• Zapper button
• Charging port
• Charging terminal

Operation

Using the Mosquito Swatter

• Ensure the device is fully charged before use.
• To turn the Mosquito Swatter on, slide the power switch up to the 'Power on' (⚙️) position or the 'On + LED light' (?) position.
• Hold the Zapper button to activate the electric charge. The power indicator LED will turn on. Do not touch the surface of the swatter while in use.
• Hold the button down while swatting.
• When not swatting, release the Zapper button. The power indicator light LED will turn off, however, there will still be excess voltage in the metal mesh. Do not touch the metal mesh. After 3-5 seconds, the voltage will be automatically eliminated.
• When the switch is set to the 'On + LED light' (?) position, the LED light will be on.
• Slide the switch down to the 'Power off' (❌) position to turn the device off.

Charging

• Plug the USB charging cable into a compatible adapter or power supply (rated 5V DC, 300mA), ensuring the power supply is turned on.
• Place the device on the charging base to commence charging, ensuring the charging port connects with the base's charging terminal.
• When charging, the charging indicator will display red (?). Once fully charged, it will turn blue (?).
• Charge the device when the battery is low or the voltage is too weak to effectively swat mosquitos.
• When storing the device for an extended period, ensure it is charged once every three months to help preserve battery life.

Cleaning & Care

• Ensure the device is switched off and has been inactive for 3-5 seconds before touching.
• Do not submerge the device in water.
• Do not rinse the device with water or wipe it with a wet towel.
• Mosquito residue on the net can be removed using a soft brush.
• If the device emits a noise during operation, a hair dryer can be used to blow any remaining residue from the net until the noise ceases. Then, continue use.

Specifications

Need More Information?

We hope this user guide has provided the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, please visit help.kogan.com.