Loyoda Toilet Safety Rails User Manual

Product Overview

The Loyoda Toilet Safety Rails are designed to provide enhanced stability and support in the bathroom, empowering independence and ensuring safety for users.

Parts List

• (1) Hrod Welded Assembly x1
• (2) Hrod Welded Assembly x1
• (3) Leg x4
• (4) Set Screw x4
• (5) Screw Gasket x4
• (6) Proximity Card x4
• (7) Paper Holder x1
• (8) Storage Bag x1
• (9) Suction Cups x4

Installation Instructions

Step 1: Open the Handrests

1. Open until both holes are exactly aligned.

2. Press pins all the way.

Step 2: Adjust the Width

Align the handrails by pressing the lock button to the desired width. The width can be adjusted after assembly as well.

Step 3: Attach All Four Legs

Align the two holes while inserting the legs into the frame. [arrow pointing up]

Step 4: Secure All Four Legs

Turn the set screw clockwise to secure the legs. Ensure the flat port faces the screw.

Step 5: Adjust the Height

Adjust the height of the legs by pressing the snap mechanism. Ensure the legs are even and fully locked.

Step 6: Installation of Foot Mats

Attach the suction cups to the bottom of each leg.

Specifications

Safety Guidelines and Care

1. Do not exceed the weight capacity – 350 lb max.
2. Use on stable surfaces only.
3. Regularly inspect for signs of wear, damage, or loose parts.
4. Clean regularly using a mild detergent and warm water, rinse off any soap residue. After cleaning, dry thoroughly.
5. Before use, confirm with your healthcare provider that the product meets your specific needs. The following guidelines are not a substitute for medical advice.