Clover Mini (2nd Generation) Quick Start Guide

Setup Instructions

Follow these steps to set up your Clover Mini:

Step 1: Unpack Components

You will find the Clover Mini terminal, a power adapter, a USB-C cable, and an Ethernet cable.

Step 2: Connect Power Cable

Connect the USB-C cable from the power adapter to the Clover Mini terminal.

Step 3: Connect Network Cable

Connect the Ethernet cable to the Clover Mini terminal.

Step 4: Connect to Power Outlet

Plug the power adapter into a grounded AC power outlet. This should be the last connection made.

(Multilingual instruction: "Plug in last, to a grounded AC power outlet." / "Brancher en dernier sur une prise de courant alternatif (CA) mise à la terre." / "Zuletzt einstecken." / "Enchufe al último." / "Collegare per ultimo." / "Sluit als laatste aan.")

Step 5: Power On

The terminal will power on and display its startup screen.

Company Information

Clover Network, Inc.

415 N Mathilda Ave

Sunnyvale, CA 94085, USA

For patents, visit: clover.com/patents

EU Declaration of Conformity

EU Importer: Marketplace Merchant Solutions Ltd, Unit 9, Richview Office Park, Clonskeagh, Dublin 14, Ireland

Clover Network, Inc. declares that the radio equipment type C302E complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: eu.clover.com/eu-compliance

EU Frequency Bands and Transmitted Power:

• 2400MHz - 2483.5MHz: 19.5 dBm (EIRP)
• 5150MHz - 5250MHz: 20.5 dBm (EIRP)
• 5250MHz - 5350MHz: 26 dBm (EIRP)
• 5470MHz - 5725MHz: 26.5 dBm (EIRP)

Europe LTE Band Power (C302E):

• LTE Band 3: 23 dBm (conducted)
• LTE Band 7: 23 dBm (conducted)
• LTE Band 20: 22.5 dBm (conducted)

NFC Power:

• NFC (13.56MHz): -11.33 dBμA/m (@10m)

Note: 5150MHz-5350MHz is for indoor use only.

RF Radiation Caution:

This equipment complies with EU radiation exposure limits for uncontrolled environments. Maintain a minimum distance of 20cm between the radiator and your body during installation and operation.

Product Models and Compliance Identifiers

Clover Mini (2nd generation)

• Model Number: C302U (United States and Canada LTE)
• FCC ID: HFS-C302U
• IC: 1787B-C302U
• Model Number: C302U (United States and Canada Wi-Fi)
• FCC ID: HFS-C302W
• IC: 1787B-C302W
• HVIN: C302W
• Model Number: C302L (Argentina)
• CNC ID: C-22360
• Model Number: C302E (Europe LTE)
• Model Number: C302E (Europe Wi-Fi)

Note: FCC ID & IC certificates are not applicable to C302E and C302L models.

Waste Electrical and Electronic Equipment (WEEE)

This product is covered under the European Union's WEEE Directive (2012/19/EU). It requires separate collection and management from household waste in all EU member states. Please follow local environmental authority guidance or ask your retailer for collection or recycling options.

FCC Part 15 Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including that which may cause undesired operation.

FCC Part 15 Class B Specifics

This equipment has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in residential installations. If interference occurs, users are encouraged to try correcting it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to a different circuit than the receiver.
• Consulting the dealer or an experienced radio/TV technician.

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC RF Exposure Compliance (SAR Statement)

This equipment complies with FCC radio frequency (RF) exposure limits for uncontrolled environments. Maintain a minimum distance of 20cm between the radiator and your body.

Innovation, Science and Economic Development Canada (ISED) Statement

CAN ICES-3 (B)/NMB-3(B)

This device complies with ISED's license-exempt RSSs. Operation is subject to two conditions: (1) this device may not cause interference, and (2) it must accept any interference, including interference that may cause undesired operation.

(French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.)

The device may automatically discontinue transmission in case of absence of information or operational failure. This does not prohibit transmission of control/signaling information or use of repetitive codes.

• Operation in the 5150-5250 MHz band is for indoor use only to reduce potential interference to co-channel mobile satellite systems.
• Maximum antenna gain for devices in bands 5250-5350 MHz and 5470-5725 MHz must comply with e.i.r.p. limits.
• Maximum antenna gain for devices in the band 5725-5825 MHz must comply with e.i.r.p. limits for point-to-point and non-point-to-point operation.

High-power radars are primary users of bands 5250-5350 MHz and 5650-5850 MHz and may cause interference or damage to LE-LAN devices.

(French: De plus, les utilisateurs de radars de haute puissance sont désignés comme utilisateurs principaux des bandes comprises entre 5 250 et 5 350 MHz, et entre 5 650 et 5 850 MHz, et ces radars pourraient causer des interférences et/ou des dommages aux appareils LAN-EL.)

ISED RF Exposure Compliance

This equipment complies with IC RSS-102 RF exposure limits for uncontrolled environments. Maintain a minimum distance of 20cm between the radiator and your body.

(French: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.)

CE RF Exposure Compliance

This device meets EU requirements (1999/519/EC) and ICNIRP guidelines on limiting public exposure to electromagnetic fields.

Note: This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

Important Information for UK Power Adapter Cord

If the socket outlet is not suitable for the supplied plug, cut off the plug and fit an appropriate three-pin plug. A 3-amp fuse approved by ASTA to BS 1362 must be fitted in the plug or adaptor or main fuse box.

Warning: The severed plug must be destroyed as it is hazardous if engaged in a live socket outlet. Always replace the fuse cover; never use plugs with the cover omitted.

Wiring: This appliance must be earthed. The mains lead wires are colored:

• Green-and-Yellow = Earth
• Blue = Neutral
• Brown = Live

Connect the wires to the corresponding terminals (E/Earth/Green-Yellow, N/Black/Blue, L/Red/Brown) in the plug.

Argentina Specific Information

This product uses a Clover power supply, model FSP040-RHBN3. Input: AC 100-240 V, 50-60 Hz, 1.5 A, Cl. I; Output: DC 12 V, 3.33 A. This power supply has been certified for use in the Argentine market.

Warning: Connecting a different power supply could cause fire or electric shock. Do not use a different power supply with this equipment.