Bristan KN2 SHXRR C
COLONIAL Shower Range
Colonial2 Thermostatic Shower Valve with Rigid Riser Chrome
[Image of KN2 SHXRR C shower valve with rigid riser]
Specification
| Finish/Colour: | Chrome Plated |
|---|---|
| Main Construction Material: | Brass |
| No. of Controls: | 2 |
| Shower Type: | Sequential Mini Valve |
| Shower Head Type: | Fixed Head |
| Shower Kit: | Rigid Riser |
| Valve/Cartridge Type: | Concentric Cartridge |
| Maximum Hot Water Supply Temperature °C: | 60 |
| Plumbing System Suitability: | All Systems, Ideally Balanced |
| Minimum Dynamic Pressure (bar): | 0.1 |
| Maximum Dynamic Pressure (bar): | 5 |
| Maximum Static Pressure (bar): | 10 |
| Connection Inlet: | 15mm Compression |
| Connection Outlet: | G 1/2" |
| Isolation Valve Included: | No |
| Check Valve Included: | Yes |
Features:
- TMV2 Rated Only Between 1 bar minimum and 5 Bar Maximum Dynamic Pressure.
- All in one box - pack includes shower valve, rigid riser rail and a fixed head so nothing to buy separately.
- Easy installation with adjustable elbow inlets which enable you to use on existing pipework centres between 110mm and 155mm so there's no need for retiling.
- A hard-wearing, flawless, scratch resistant chrome finish that lasts for years. Salt spray tested to ensure added durability.
- Thermostatic cartridge with preset temperature safety stop at 42°C for family-safe showering.
- Automatic shut-off in the event of hot or cold water supply failure for family safe showering.
Dimensions (measurements in mm)
[Diagram showing dimensions: Overall height 1080mm, shower head diameter Ø115mm, riser rail to wall 440mm, valve to wall 380mm, riser rail to head 955mm, pipework centres 110-155mm, bottom pipe connection 115mm]
Flow Rates (l/min)
| System Pressure (bar) | 0.1 | 0.5 | 1 | 2 | 3 | 5 |
|---|---|---|---|---|---|---|
| Valve Only (mixed) | 7.1 | 15.8 | 22.3 | 31.6 | 38.7 | 50 |
| Through Fixed Head (mixed) | 1.4 | 3.1 | 4.3 | 6.1 | 7.5 | 9.7 |
| With Flow Limiters (mixed) | 1.4 | 3.1 | 4.3 | 6.1 | 7.5 | 9.7 |
Product Certifications:
[WRAS Approved Product logo]
[NSF Certified TMV2 logo]
WRAS Certificate No: 240403011
WRAS Expiry Date: 30/04/2029
TMV2 Certificate No: 2503305
TMV2 Designation: HP-SE
TMV2 Expiry Date: 16/03/2030
[Water Label logo] 7.5 l/min
