ResMed Oximeter Adapter

Introduction

This document provides a user guide for the ResMed Oximeter Adapter. It details the intended use, setup, and troubleshooting for the adapter, which connects a NONIN Xpod oximeter to compatible ResMed devices.

Intended Use

The ResMed Oximeter Adapter is designed to connect a NONIN Xpod oximeter to ResMed devices such as AirSense 10, AirCurve 10, Lumis, and S9 models. Oximetry data, including oxygen saturation and pulse rate, is recorded on an inserted SD card.

Compatibility

• Air10 Oximeter Adapter: Compatible with AirSense 10, AirCurve 10, and Lumis devices.
• S9 Oximeter Adapter: Compatible with S9 devices.

Setup and Usage

The guide outlines the steps for connecting the oximeter adapter and the finger pulse sensor to the device. It also provides instructions for removing and returning the oximeter adapter and SD card to a care provider.

Troubleshooting and Maintenance

Information is provided on common issues, such as the finger pulse sensor not being attached correctly or the oximeter adapter not transmitting data. Basic cleaning and maintenance instructions are also included.

Technical Specifications

Key technical specifications are listed, including operating temperature, humidity, storage conditions, design life, dimensions, weight, and oximeter compatibility. Symbols commonly found on the adapter or packaging are also explained.

Important Safety Information

WARNING: Do not open or modify the oximeter adapter. Only use compatible NONIN finger pulse oximeters. Ensure correct compatibility with your ResMed device to prevent patient injury. Avoid excessive pressure with finger pulse oximeters.

CAUTION: In the US, this device is restricted to sale by or on the order of a physician. Use the oximeter adapter only as specified. Do not use liquids for cleaning.

For more information, refer to the ResMed website at www.resmed.com.