RSL Wireless Remote Control

Operating Elements

The RSL wireless remote control is a handheld device designed for operating compatible radio-controlled power outlets. It features several key components:

• 1. [Indicator Lamp]: A small light that illuminates when a button is pressed.
• 2. [Control Keys]: Buttons used to individually activate or deactivate channels.
• 3. [ALL ON/ALL OFF Key]: A dedicated button to activate or deactivate all channels simultaneously. (Note: Model RSL020T-B does not include this key.)
• 4. [Battery Compartment Lid]: Located on the back of the remote, providing access to the battery.

Inserting/Replacing Battery

Steps:

• 1. Remove the [battery compartment lid] (4) from the back of the remote control.
• 2. Insert one round cell battery, type CR2032, into the battery recess. Ensure the positive pole faces upward, indicated by the [positive pole indicator] (+) imprint on the battery. Push the battery fully into the recess.
• 3. Close the [battery compartment lid]. The battery should be replaced when the remote control's range decreases or the [indicator lamp] (1) no longer lights up when a button is pressed.

Key Functions

• The [control keys] (2) are arranged in two columns: the left column controls 'ON' functions, and the right column controls 'OFF' functions.
• Use the upper four keys on the left column to activate channels 1 through 4 individually.
• Use the upper four keys on the right column to deactivate channels 1 through 4 individually.
• Use the lower key 'ALL ON' on the left column to activate channels 1 through 4 simultaneously.
• Use the lower key 'ALL OFF' on the right column to deactivate channels 1 through 4 simultaneously.
• The [indicator lamp] (1) illuminates each time a key is pressed, confirming button activation.

Operation

Configuration and dimming functions are dependent on your specific radio-controlled power outlet. For detailed information, please refer to the operating instructions provided with your power outlet. The remote control is capable of operating an unlimited number of compatible radio-controlled power outlets.

Technical Data

Notice

Chemical Burn Hazard

Do not ingest battery. This product contains a coin/button cell battery. If swallowed, it can cause severe internal burns within 2 hours and may lead to death.

Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you suspect a battery may have been swallowed or placed inside any part of the body, seek immediate medical attention.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.