Installation Guide for APEXEL models including: Mobile Phone Filter, Phone Filter, Mobile Filter, Filter
NiSi IP-A paisaje kit
1 IP-A holder Silicone Locking screw Silicone Slot Registration hole for phone lens IP-A holder front IP-A holder back 2 Square filter holder Mount for IP-A holder Clip Filter slot Square filter holder front Square filter holder back 3 TRUE COLOR ND-VARIO 1-5stops (0.3-1.5) 4 Black mist 1/4 5 Streak filter Blue/Orange 6 Polarizer 7 Medium GND 0.9 8 ND 64(1.8) IP-A holder installation Achieve correct exposure No vignetting on 0.5X magnification Real Motion Blur Creates cinematic look Emulates anamorphic lens flare Highlight blooming Creates symmetrical streaks Provides little loss of from point light source detail across entire image Eliminates or add reflections Ideal degree of graduation Saturates colors Smooth transition Enhances blue skies Particularly useful for scenes and green foliage with small elements protruding into the skyline Double side nano coating Optical glass For long exposure photography * Stack up to two circular filters. * Stack up to two filters with the square filter holder. The IP-A holder is attached to the top of the phone. The locking screw attaches to the front of the phone. The registration hole attaches to the back of the phone. The phone lens is aligned with the registration hole. Turn the locking screw clockwise, until the IP-A holder is fastened. * Most phone cases are supported. * Caution: The phone screen may be damaged if the locking screw is over tightened. Circular filter installation Square filter installation Align the circular filter bayonet to three installation positions. Ensure that outer bayonet of the filter aligns with the IP-A holder slot and turn clockwise to tighten. Align the three bayonets on the square filter holder with the three holes on the IP-A holder. Ensure that the outer bayonets of the square filter holder completely align with the IP-A holder, then turn clockwise to tighten. If multiple filters need to be installed, align the three bayonets on the second round filter with the three holes on the filter clip slot which have been fixed on the IP-A holder. Ensure that the outer bayonets of the filter are completely aligned with the round filter clip slot, then turn clockwise to tighten. Insert the square filter into the square filter holder slot. Ensure that the lens can be adjusted up and down freely. You are now able to create photographic art.macOS Version 12.5 (Build 21G72) Quartz PDFContext Adobe Illustrator CC 2017 (Windows)