BLUETTI Premium 200 V2 Portable Power Station

Important Instructions

For optimal performance, fully charge the unit and update its firmware before first use. Refer to the appendix "Update Firmware via BLUETTI App" for instructions. It is essential to read and understand this manual before operating the unit and to keep it for future reference.

Key Features and Operation

• Power On/Off: Press the power button to turn the unit on. A lit button indicates standby mode. Press and hold the power button for approximately 2 seconds to turn the unit off.
• AC/DC Power: Press the AC power button to turn AC output on/off. Press the DC power button to turn DC output on/off.
• Charging: The unit can be charged via a wall outlet or solar panels. For faster AC charging, enable "Turbo Charging" via the BLUETTI app. Solar charging requires panels with a voltage range of 12V-60V and a maximum current of 20A.
• Display Screen: The LCD display provides information on battery status, charging/discharging power, input/output voltage, temperature, and more.

Safety Precautions

• Always follow basic precautions to reduce the risk of fire, electric shock, or injury.
• Avoid drops, violent impacts, or tilting the product.
• Do not insert foreign objects into the product's ports.
• Do not use the product in rain or high humidity environments.
• Handle with caution in low air pressure environments.
• Charge the product in a well-ventilated area.
• In case of fire, use a dry powder fire extinguisher.
• Never dispose of the battery in fire or hot ovens.
• Do not operate with damaged cords or plugs.
• Do not disassemble the product; seek qualified service personnel for repairs.
• The product is not permitted on aircraft.

Disposal and Recycling

Dispose of old electronic components and batteries at designated recycling centers. Batteries contain hazardous chemicals and should not be mixed with household waste. Follow local laws and regulations for proper battery disposal.

Contact Information

For questions or concerns, please contact BLUETTI support. Shenzhen PowerOak Newener Co., Ltd. is located at F19, BLD No.1, Kaidaer, Tongsha RD No.168, Xili street, Nanshan, Shenzhen, China. More information is available on their website: https://www.bluettipower.com.