Noise ColorFit Pro 2 Smartwatch User Manual

Getting Started

Charging the Device

Connect and charge your ColorFit Pro 2 as shown in the diagram. It is recommended to charge the device for at least 2 hours before its first use.

[Diagram: Shows connecting the ColorFit Pro 2 to a charger.]

Wearing the Smartwatch

Wear the ColorFit Pro 2 approximately one finger's distance above your wrist bone. Ensure the watch is snug enough so that no light is visible from the heart rate sensor on the back. The watch should not shift when you move your arms.

Tip: Wearing the watch too loosely may affect the accuracy of heart rate data.

Setting Up with NoiseFit Sport App

To set up your watch, download and install the NoiseFit Sport app on your iOS or Android device. You can scan the provided QR code with your smartphone camera or search for "NoiseFit Sport" in your respective app store.

[QR Code: For downloading the NoiseFit Sport app.]

Important: Do not pair the watch directly through your phone's Bluetooth settings. Always use the NoiseFit Sport app for pairing.

Pairing Process

1. Turn on Bluetooth and GPS on your smartphone.
2. Open the NoiseFit Sport app and navigate to the pairing menu.
3. Select "ColorFit Pro 2" from the list of available devices.
4. Confirm the pairing by clicking "Ok".
5. For iPhones: After completing the pairing in the NoiseFit Sport app, you must also complete the Bluetooth pairing with your ColorFit Pro 2 within your iPhone's built-in Bluetooth settings. iPhones will not display pairing prompts otherwise.

Note: During the pairing process, the NoiseFit Sport app will request permission to enable Bluetooth and GPS, and access your phone's location services.

Synchronizing Data

Your ColorFit Pro 2 tracks health data, including 24/7 heart rate. To record this data, connect the watch to the NoiseFit Sport app. To synchronize data, open the app and swipe down on the main page to initiate a sync.

For iOS devices: Open iPhone Settings > Bluetooth > search for and pair with your ColorFit Pro 2.

Note: To prevent data loss, synchronize your watch data at least once every 7 days, as the ColorFit Pro 2 can only store data internally for a maximum of 7 days.

Using Your ColorFit Pro 2

Operating Instructions

Right Key Functions:

• Short press: Returns to the previous page.
• Long press: Starts an action or enters a mode.

Changing Watch Faces:

Press and hold the current watch face on the screen to access the interface for choosing different watch faces.

[Illustration: Shows pressing and holding the watch face to select new designs.]

Navigating Modes:

Swipe the screen to enter different modes. The interface typically includes a Notice bar, Status bar, Function list, and Data bar.

[Visuals: Depict swiping the screen to access various interface elements.]

ColorFit Pro 2 Modes:

• Sports Mode: Select from various sports types. You can customize which modes appear on your watch via the app.
• Heart Rate: Perform a real-time heart rate test or view your daily heart rate data.
• Breathe: Guided breathing exercises to help regulate breathing and promote relaxation.
• Alarm: Set, view, turn on, or turn off alarms. Alarms can be added through the app.
• Music: Control music playback on your connected smartphone. The watch itself cannot store or play music.
• Stopwatch: Use the built-in stopwatch for timing events or countdowns.
• Sports Records: Review your recent sports activity logs.

For additional functions like sleep tracking, please refer to the NoiseFit Sport app.

Recording Sports:

1. To enter Sports Mode: Tap the sports mode icon, select your desired sports type, and the sports countdown will begin automatically.
2. During Sports: Short press the right key to pause recording. Short press again to resume.
3. To End Sports: Long press the right key, then select the "End" button on the screen to stop and save the recording.

[Illustrations: Show icons for Sports Mode and the steps for managing sports recording.]

Key Features

The ColorFit Pro 2 offers various features including:

• Sports Mode tracking
• Heart Rate monitoring
• Breathing exercises
• Alarm clock functionality
• Music control for smartphones
• Stopwatch and Sports Records

[Visuals: Icons representing Sports Mode, Heart Rate, Breathe, Alarm, Music, Stopwatch, Sports Records.]

Cleaning and Maintenance

To ensure the longevity and proper functioning of your ColorFit Pro 2:

1. Keep the product clean.
2. Keep the product dry.
3. Avoid wearing the watch too tightly.
4. Do not use household cleaners. If cleaning is necessary, use a soap-free detergent.

Safety and Product Information

Battery Warnings:

Do not disassemble, pierce, or damage the battery. Do not attempt to remove built-in batteries from non-replaceable battery devices. Avoid using sharp objects to remove the battery.

Health Warnings:

The watch's optical heart rate sensor emits a green light that flashes. If you have epilepsy or are sensitive to flashing lights, consult a physician before wearing this product.

The device tracks daily activities (steps, sleep, distance, heart rate, calories) using sensors. While intended for fitness and entertainment, these data may not be completely accurate. The device, its accessories, and data are not intended for medical purposes and should not be used for diagnosing, monitoring, treating, or preventing any diseases or symptoms. Heart rate data is for reference only. The manufacturer is not responsible for consequences arising from data deviations.

Cycling Warning:

Always exercise good judgment and ride safely. Ensure your bicycle and hardware are properly maintained, and all components are correctly installed.

Matters Needing Attention:

• Synchronize watch data at least once every 7 days to prevent data loss.
• The watch is not waterproof against seawater, acidic/alkaline solutions, chemical reagents, or other corrosive liquids. Damage or defects from misuse are not covered by warranty.
• Sports mode supports up to 6 hours of continuous exercise.
• The watch has an IP68 water resistance rating, suitable for cold water showers and swimming, but not for diving.
• Avoid wearing the watch too tightly during daily use. Keep skin-contacting parts dry.
• Keep your arm still during heart rate measurements for accuracy.

Compliance:

• ROHS: The device complies with EU ROHS criteria, referencing IEC 62321 and EU ROHS Directive 2011/65/EU.
• FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it must not cause harmful interference, and (2) it must accept any received interference. Unauthorized modifications may void the user's authority to operate the equipment. This equipment has been tested and found to comply with Class B digital device limits, designed for reasonable protection against harmful interference in residential installations. If interference occurs, users are advised to reorient/relocate the antenna, increase separation between equipment and receiver, connect to a different circuit, or consult a dealer/technician.

Caution: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Dispose of used batteries according to instructions.

Old electrical appliances should be disposed of separately from household waste at designated communal collection points. This helps recycle valuable raw materials and treat toxic substances.

Warranty Information

Limited Warranty Period: The Noise product and its accessories are covered against manufacturing defects for 1 year from the date of purchase.

Exclusions: The warranty does not cover:

• Unauthorized tampering, modification, or repairs.
• Physical damage due to abuse, neglect, improper use, handling, storage, installation, or testing, including any use not in accordance with the product manual or instructions.
• Any misconduct related to the product.
• Clauses mentioned in the online return policy.

For further details on product replacement or refund queries, please refer to the terms and conditions on the return policy section at www.gonoise.com.

Customer Care and Support

Thank you for purchasing from www.gonoise.com. For any assistance, please contact our Customer Care Team:

• Phone: +91 88-82-132-132
• Email: support@nexxbase.com

We hope you have an excellent experience with your product.

Register Warranty: Visit www.gonoise.com/pages/warranty-registration

Service and Support: Extended Warranty options may be available.

[QR Code: For warranty registration or product support.]

Packaging Dimensions

The following dimensions are provided for the user manual and its accompanying envelope:

• Width: 61.00 mm
• Height: 51.00 mm
• Depth: 81.00 mm
• Flap: 4mm

The specified color for the packaging is PANTON 7544 c.

[Diagram: Shows the dimensions of the user manual and its envelope.]