Redmi 10 2022 Quick Start Guide

Thank you for choosing the Redmi 10 2022. Long press the power button to turn on the device. Follow the on-screen instructions to configure the device. For more information, visit the official website: www.mi.com/global/service/userguide.

MIUI

The Redmi 10 2022 comes pre-installed with MIUI, Xiaomi's customized Android-based OS. It provides frequent updates and user-friendly features based on feedback from over 200 million active users worldwide. For more information, please visit en.miui.com.

SIM Card Tray

An illustration shows a SIM card tray with two slots for Nano-SIM cards and one slot for a Micro SD card.

About Dual SIM:

Dual 4G SIM is offered by select telecom operators and may not be available in all regions.
Supports dual nano-SIM cards. When using both SIM card slots, either card can be set as the primary card.
VoLTE is only supported by telecom operators in certain regions.
The system may be automatically updated for optimal network performance. For details, please refer to the system version in use on the device.
Please do not insert non-standard SIM cards into the SIM card slot, as they may damage the SIM card slot.
WARNING: Do not disassemble this device.

Device Overview

A diagram shows the front of the Redmi 10 2022 smartphone. The screen displays the time '02 48' and date 'SAT. 16 AUG.'. On the right side, labels point to 'Volume Buttons' and 'Power Button'. At the bottom, a label indicates the 'USB Type-C Port'.

Environmental Information (WEEE)

Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased. To view the Environmental Declaration, please refer to: www.mi.com/en/about/environment.

Important Safety Information

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage, do not listen at high volume levels for long periods. Additional safety information and precautions can be accessed at: www.mi.com/en/certification.

General Safety

Read all safety information below before using your device.
Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
Use only authorized accessories compatible with your device.
The device's operating temperature range is 0°C to 40°C. Using the device outside this range may cause damage.
If your device has a built-in battery, do not attempt to replace it yourself to avoid damaging the battery or device.
Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage.
After charging, disconnect the adapter from the device and power outlet. Do not charge for more than 12 hours.
The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to local regulations.
Do not disassemble, hit, crush, or burn the battery. If deformed or damaged, stop using it immediately.
Do not short circuit the battery, as this may cause overheating, burns, or other injury.
Do not place the battery in a high-temperature environment, as overheating may cause explosion.
Keep your device dry.
Do not attempt to repair the device yourself. Contact Mi customer support or an authorized repair center if any part malfunctions.
Connect other devices according to their manuals. Do not connect incompatible devices.
For AC/DC adapters, the socket-outlet shall be installed near the equipment and be easily accessible.

Safety Precautions

Observe all applicable laws and rules restricting mobile phone use in specific situations and environments.
Do not use your phone at petrol stations or in any explosive atmosphere or potentially explosive environment (e.g., fueling areas, below decks on boats, fuel/chemical transfer/storage facilities, or areas with chemicals/dust/metal powders). Obey signs to turn off wireless devices. Turn off your phone in blasting areas or areas requiring "two-way radios" or "electronic devices" to be turned off.
Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with hospital and health center rules. If you have a medical device, consult your doctor and the device manufacturer regarding potential interference. To avoid pacemaker interference, maintain a minimum distance of 15 cm between your phone and the pacemaker. Use the phone on the ear opposite your pacemaker and do not carry it in a breast pocket. To avoid interference with medical equipment, do not use your phone near hearing aids, cochlear implants, or similar devices.
Observe aircraft safety regulations and turn off your phone on board aircraft when required.
When driving, use your phone in accordance with traffic laws and regulations.
To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
Do not use your phone to make calls while it is charging.
Do not use your phone in high humidity places (e.g., bathrooms), as this may result in electric shock, injury, fire, and charger damage.

Security Statement

Please update your phone's operating system using the built-in software update feature, or visit an authorized service outlet. Updating software through other means may damage the device or result in data loss, security issues, and other risks.

EU Regulations

RED Declaration of Conformity

Xiaomi Communications Co., Ltd. declares that this GSM / GPRS / EDGE / UMTS / LTE Digital Mobile Phone with Bluetooth and Wi-Fi 21121119SG complies with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.mi.com/en/certification.

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).

During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions simulating RF exposure against the head with no separation and near the body with a 5 mm separation.

SAR compliance for body operation is based on a 5 mm separation distance. The device should be carried at least 5 mm away from the body to ensure RF exposure level is compliant or lower than the reported level. When attaching the device near the body, use a belt clip or holster without metallic components that allows at least 5 mm separation. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided.

Certification Information (Highest SAR)

SAR 10 g limit: 2.0 W/Kg. SAR Value: Head: 0.597 W/Kg, Body: 0.988 W/Kg (5 mm distance).

Legal Information

This device may be operated in all EU member states. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in Hong Kong and the following countries:

AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), IS, LI, NO, CH, TR.

Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Power Adapter Requirements

Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards.

Frequency Bands and Power

This mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power:

GSM 900: 35.5 dBm
GSM 1800: 32.5 dBm
WCDMA band 1/8: 25.7 dBm
LTE band 1/3/7/8/20/28/38/40: 25.7 dBm
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm

FCC Regulations

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR) - FCC

This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate, or SAR.

The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.5 cm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of such body-worn accessory should be avoided. Any accessory used with this device for body-worn operation must keep the device a minimum of 1.5 cm away from the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

E-label

This device has an electronic label for certification information. To access it, please go to Settings > About phone > Certification, or open Settings and type "Certification" into the search bar.

Model Information

Model: 21121119SG. The '2112' indicates that this product will be launched after December 2021.

Adapter Information

Manufacturer: Xiaomi Communications Co.,Ltd.

Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China

Model: MDY-11-EN

Input Voltage: 100-240V~

Input Frequency: 50/60Hz

Output Voltage: 5.0V/9.0V/12.0V/10.0V

Output Current: 3.0A/2.23A/1.67A/2.25A Max

Output power: 15.0W/20.0W/20.0W/22.5W Max

Average active efficiency: ≥81.39%

Disclaimer

This user guide is published by Xiaomi or its local affiliated company. Improvements and changes to this user guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the user guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Brand: Redmi

Model: 21121119SG

	Redmi Note 11 Pro Quick Start Guide \| Xiaomi Official quick start guide for the Xiaomi Redmi Note 11 Pro smartphone. Learn about setup, MIUI, SIM card usage, safety precautions, WEEE disposal, EU and FCC regulations, SAR information, and product specifications.
	Redmi 6 User Guide - Setup, Safety, and Specifications Comprehensive user guide for the Xiaomi Redmi 6 smartphone (model M1804C3DG), detailing setup, MIUI features, SIM card usage, essential safety precautions, environmental disposal guidelines, EU and FCC regulatory compliance, frequency bands, and SAR information.
	Redmi 6A User Guide - Setup, Safety, and Specifications Official user guide for the Xiaomi Redmi 6A smartphone, covering setup, MIUI, SIM card usage, safety precautions, EU and FCC regulations, and technical specifications.
	Xiaomi 11 Lite 5G NE Quick Start Guide - Setup, Features, and Safety Get started with your Xiaomi 11 Lite 5G NE. This guide covers device setup, MIUI features, dual SIM usage, important safety information, regulatory compliance (EU, FCC, UK), technical specifications, and adapter details.
	Xiaomi 12T Quick Start Guide: Setup, Features, and Safety Get started with your Xiaomi 12T. This guide provides essential setup instructions, MIUI overview, dual SIM details, important safety information, regulatory compliance, and technical specifications.
	Redmi 10C Quick Start Guide \| Xiaomi Get started with your Redmi 10C. This quick start guide provides essential information on setup, MIUI, SIM card usage, safety precautions, and regulatory compliance.
	Xiaomi Mi 11 Lite User Guide: Features, Safety, and Regulations Comprehensive user guide for the Xiaomi Mi 11 Lite smartphone, covering setup, MIUI features, dual SIM usage, safety precautions, EU regulations, FCC compliance, and RF exposure information.
	Xiaomi 13T Pro Quick Start Guide - Setup and Safety Information Get started with your Xiaomi 13T Pro. This quick start guide covers device setup, MIUI features, important safety precautions, EU and FCC regulations, and technical specifications.