11.5 High-Speed Rotation
During flight, a short press of the High Speed Rotation button on the transmitter will produce a “Di” sound, indicating the drone has entered High-Speed Rotation mode. The drone will automatically exit this mode after 10 seconds. Alternatively, pushing the direction joystick in any direction will stop the rotation.
11.6 Circle Fly
During flight, a long press of the Circle Fly button on the transmitter will produce a long “Di” sound, indicating the drone has entered Circle Fly mode. The drone will automatically exit this mode after 10 seconds. Pushing the direction joystick in any direction will also exit Circle Fly mode.
11.7 Headless Mode
Warning: Please familiarize yourself with the Headless Mode function before use. Failure to do so may result in losing the drone or causing unnecessary loss.
Description: In Headless Mode, the drone's forward direction is determined by the direction the drone's head faces at take-off, regardless of the drone's actual orientation in the air. To ensure the pilot can correctly identify the drone's direction:
- Pilots should remain facing the same direction as the drone's head at take-off.
- When the pilot pushes the direction joystick forward, the drone will fly forward relative to the pilot's orientation.
- When the pilot pushes the direction joystick backward, the drone will fly towards the pilot.
- When the pilot moves the direction joystick left or right, the drone will move left or right relative to the pilot.
Activation/Deactivation:
- After pairing/calibration, short press the Headless Mode button on the transmitter. The drone's indicator light will flash continuously, and the transmitter will emit continuous beeps.
- Press the Headless Mode button again. A beep from the transmitter indicates the drone has exited Headless Mode.
11.8 Camera Angle Adjustment
During flight, the wheel can be dialed left or right to adjust the camera tilt up or down. The camera has a 90° tilt range.
11.9 Altitude-hold Function
The drone is equipped with an altitude-hold function, allowing it to maintain its altitude after the left joystick is released. The left joystick will automatically spring back to the center position.
12.0 SPECIFICATIONS
| Category | Details |
|---|---|
| DRONE | Model: HS440 Weight: 166g / 5.9oz Max Flight Time: 20 minutes (per battery) Motor Model: 8620 Operating Temperature Range: 32° to 104°F (0° to 40°C) Size (Unfolded): 289*195*59mm Size (Folded): 125*81*59mm |
| DRONE BATTERY | Capacity: 1900mAh Voltage: 3.8 V Battery Type: Li-Po Battery Energy: 7.22Wh Charging Temperature Range: 41° to 104°F (5° to 40°C) Charging Time: 180 minutes (Depends on charging power and remaining battery power) |
| TRANSMITTER | Operating Frequency: 2.4 GHz Max Flight Distance: 330 feet / 100m (Outdoors and unobstructed) Operating Temperature Range: 32° to 104°F (0° to 40°C) Battery Type: 1.5V AAA Battery (Not included) |
| CAMERA | Operating Frequency: 2.4GHz Lens Angle: 112° Adjustable Range: -90°~0° Video/Photo Resolution: HD1920 x 1080P (Stored in TF card), HD1280 x 720P (Stored on mobile phone) Max Transmission Distance: 330 feet / 100 m (Outdoors and unobstructed) Live View Quality: 20fps Photo Formats: JPEG Video Formats: MP4/AVI Supported TF Cards: Supports TF Card up to 32 GB (Not included) Operating Temperature Range: 32° to 104°F (0° to 40°C) |
| USB CHARGING CABLE | Voltage: 5 V Rated Power: ≤10 W |
13.0 CONTACT US
For further support, please contact Holy Stone:
- America: usa@holystone.com
- Canada: ca@holystone.com
- Europe: eu@holystone.com
- Japan: jp@holystone.com
- Phone: +1(855) 888-6699
For online support, scan the QR code with Live Chat.
14.0 GENERAL INFORMATION
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are set to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will definitely disappear after a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation distance between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from the receiver.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body.
IC Notice
This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-3 (B)
Avis d'Industrie Canada
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
- l'appareil ne doit pas produire de brouillage; et
- l'utilisateur de l'appareil doit accepter le brouillage radioélectrique subi même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radiation Exposure Statement (IC): This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Déclaration d'exposition aux radiations (IC): Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
HOW TO RECYCLE THIS PRODUCT
The symbol on the product or its documentation indicates that it MUST not be disposed of together with household waste. Uncontrolled waste disposal may harm the environment or human health. Please separate your device from other types of waste for recycling it responsibly. This will help to foster the sustainable re-use of material resources. We suggest you contact your retailer, inquire at your local town hall or business store to find out where and how the drone can be recycled.
BATTERY WARNING:
- Failure to follow all instructions may result in serious injury. Irreparable damage to the battery may cause a fire, smoke, or explosion.
- Always check the battery's condition before charging or using it.
- Please replace the battery if it is dropped or has any peculiar smell, overheating, discoloration, deformation, or leakage.
- Never use anything other than the approved LiPo Charger to charge the battery. Always use a balancing charger for LiPo cells or a LiPo cell balancer. It is recommended to use the one provided with the product.
- The battery temperature must never exceed 60°C (140°F), otherwise the battery could be damaged or ignited.
- Never charge the battery on a flammable surface, near flammable products, or inside a vehicle. It is better to place the battery on a non-flammable and non-conductive surface.
- Never leave the battery unattended during the charging process. Never disassemble or modify the housing's wiring, or puncture the cells. Always ensure that the charger output voltage corresponds to the battery voltage. Do not short-circuit the batteries.
- Never expose the Li-Po battery to moisture or direct sunlight, or store it in a place where temperatures could exceed 60°C (e.g., a car in the sun).
- Always keep it out of reach of children.
- Improper battery use may result in a fire, explosion, or other hazards.
- Non-rechargeable batteries are not allowed to be recharged. Rechargeable batteries should be charged under adult supervision.
- DO NOT mix different types of batteries, including new and used ones.
- Batteries MUST be inserted with the correct polarity.
- The supply terminals MUST not be short-circuited. Regular examination of the transformer or battery charger for any damage to their cords, plugs, enclosures, and other parts MUST be done. If there is damage, they MUST not be used until the damage has been repaired.
- The packaging has to be kept as it contains important information.
- The toy is only can be connected to the equipment with symbol Class II.
Caution
- The max operating temperature of the EUT is 45°C and shouldn't be lower than -10°C.
- The device complies with RF specifications when the device used at 0mm from your body.
- Declaration of Conformity.
We, Xiamen Huoshiquan Import & Export CO.,LTD, hereby declare that the compliance of the essential requirements with the Directive 2014/53/EU, the RoHS Directive 2011/65/EU and Safety Directive 2009/48/EC have been fully fulfilled on our product with indication below:
Product Name: Remote control four axis series
Model/Mark: HS440/HolyStone
The Statement of compliance is available at the following address: http://www.holystone.com/docs/HS440_EU_DOC.pdf
This product can be used among EU member states.
MANUFACTURER INFORMATION
Manufactured by:
Xiamen Huoshiquan Import & Export CO.,LTD.
Room 703, No. 813-2 Xiahe Road, Siming District, XIAMEN, China
+1(855) 888-6699
Certifications include CE, RoHS Compliant. Made in China.
