Neomounts LED-W600BLACK TV Wall Mount

Product Overview & Specifications

This document provides instructions for installing the Neomounts LED-W600BLACK TV wall mount.

Model: LED-W600BLACK

Type: TV Wall Mount

VESA Compatibility: 200x200 mm to 600x400 mm

Maximum Load Capacity: 0-35 kg (0-77 lbs)

Maximum TV Thickness: 1.8 cm (0.7 inches)

Wall Plate Dimensions: 702mm (width) x 90mm (height)

Bracket Arm Length: 436mm

Mounting Hole Patterns: 100x100 mm to 600x600 mm

Diagrams show the overall dimensions, VESA compatibility, weight capacity, and TV thickness.

Parts Included

The following parts are included with the mount:

• A: Wall Plate (x2)
• B: Center Support (x1)
• C: Mounting Arms (x1)
• M-A: M5x14 Screws (x4)
• M-B: M6x14 Screws (x4)
• M-C: M6x30 Screws (x4)
• M-D: M8x30 Screws (x4)
• M-E: M8x50 Screws (x4)
• M-F: D5 Spacers (x4)
• M-G: D8 Spacers (x4)
• M-H: Washers (x8)
• M-I: Cable Clips (x8)
• W-A: Wall Anchors (x4) - For concrete/brick walls
• W-B: Wall Anchors (x4) - For concrete/brick walls
• W-C: Wall Anchors (x4) - For concrete/brick walls

Tools Required: Drill, Spirit Level, Screwdriver (not included)

Diagrams illustrate the parts list with quantities and sizes.

Installation Steps

Step 1A: Mounting on a Stud Wall

Secure the wall plate to a wooden stud wall. Ensure the plate is level and firmly attached. Diagram shows mounting the wall plate on a wooden stud wall.

Step 1B: Mounting on a Brick or Concrete Wall

Secure the wall plate to a solid brick or concrete wall using appropriate wall anchors (W-A, W-B, W-C). Ensure the plate is level and firmly attached. Diagram shows mounting the wall plate on a brick or concrete wall using wall anchors.

Step 2: Install Adapter Brackets

Attach the adapter brackets to the TV. Use the provided screws (M-A to M-E) and washers (M-H) as needed, depending on your TV's VESA pattern and screw holes. Spacers (M-F, M-G) may be used if necessary to ensure a flush fit. The 'OPTION' section details various combinations of screws and spacers for different TV back panel configurations. Diagrams illustrate attaching brackets to the TV and using optional spacers.

Step 3: Attach Screen to Bracket and Level

Mount the TV onto the installed wall plate. Ensure the screen is securely attached and aligned. A gap of 8mm is indicated between the screen and the wall plate in the diagram. Diagrams show the TV being attached and leveled.

Step 4: Ensure Alignment

Use a spirit level [?] to ensure the TV is perfectly aligned horizontally. Adjust as needed. Diagram illustrates using a spirit level for alignment.

Step 5: Release the TV

Pull the release strap to detach the TV from the wall mount. Diagram shows a hand pulling a release strap.

Safety Precautions

General Warnings:

• Read all instructions before assembly.
• Do not exceed the maximum weight capacity of 35 kg (77 lbs).
• Ensure the wall structure can support the combined weight of the mount and the TV.
• Use appropriate wall mounting hardware for your wall type. If unsure, consult a professional.
• Keep small parts away from children.
• Do not install near heat sources or in excessively humid environments.
• Periodically check all screws and fittings for tightness.
• Do not modify the product.
• Ensure proper ventilation for the TV.
• The manufacturer is not liable for damage caused by improper installation or misuse.
• The provided wall anchors are for solid walls (brick, concrete). For hollow walls or other specific wall types, use appropriate anchors.
• Ensure the screen is securely attached to the adapter brackets before mounting to the wall.
• Do not overtighten screws, as this can damage the TV or the mount.
• This product is intended for indoor use only.