Pytes V5° Gen 2 Rack Battery

Enhanced Performance & Safety

• BMS: Battery Management System ?
• Optimized Passive Balancing
• Fire Protection ?
• Multi-Layer Suppression

The V5°a Plus offers advanced features for reliable energy storage.

Leading Pack Integration Capabilities

• Powered by Tier 1 automotive-grade battery cells
• Over 20 years of expertise in BMS design

High-Efficiency Passive Balancing Technology

• Cell-level passive balancing
• Built-in current limiters to prevent over current and improve module balancing performance

Enhanced Safety Features

• Equipped with a circuit breaker, ensuring controlled disconnection of the DC system (Emergency Shutdown Function)
• Built-in pre-charge circuit to limit inrush current and safeguard critical components
• Integrated aerosol fire suppression system

V5°a Plus Enclosures

V5° Bracket

• Indoor rated
• Floor-mounted installation
• Can stack up to 6 V5°a Plus units, expandable on demand

V-BOX-OC PLUS

• IP55 / NEMA 3 rated, suitable for both indoor and outdoor use
• Ground/Floor-mounted installation
• Busbar & Breaker integrated
• Can hold 4 V5°a Plus units, expandable on demand

Technical Specifications

Electrical Specifications

General Specifications

Internal Heating Film

Environmental Specifications

Compliance

• Certifications: UL 9540 Ed.3, UL 9540A, UL 1973, UN 38.3

Notes:
¹ Operating conditions: 25 °C ± 4 °C (77 °F ± 7 °F), 0.5 C/0.5 C @ 90% DOD, ret @70% (EOL). Total throughput energy: (51.2 V×100 Ah / 1000 × 80% × 6000 /1000) × 90%= 22 MWh.
² 10 years or 6000 cycles (whichever comes first).
³ When the ambient temperature is between -0.4 °F (-18 °C) and 32 °F (0 °C), the heating film will activate to warm the battery until the temperature reaches the battery charging temperature range. External charging source (PV, grid, generator) is required for heating film operation.